Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. phillip3606

    SOCP Test HiPath 3000

    Just wondering if anyone else has taken this exam, and maybe provide some insight or good advice? Thanks,
  2. phillip3606

    Paging Question

    Does the BCM400 4.0 page output support dtmf? I will be installing a bogen zone page module and would like to pass dtmf through page output.Is this possible or do I need to use a trunk port. Thanks
  3. phillip3606

    Voicemail internal server error

    BCM 200 lost power last night, voicemail lost all programming. Curenntly reprogramming but getting internal server error from bcm when trying to program auto attendant line administration. Any help would be greatly appreciated. Thankyou
  4. phillip3606

    Restore and Backup Question?

    Is it possible to restore a database from acs processor 3.0 to a Rev.7 processor,using a backup and restore card. Thankyou
  5. phillip3606

    BCM 50 issues

    Has anyone heard of these following issues on BCM 50 Rel.1.0 Time&Date frozen in display,unable to make outgoing calls. Incoming calls going on speaker mode after answering. Switch does not show any active alarms. Thankyou
  6. phillip3606

    Voicemail Transfer

    Thanks for the workaround.
  7. phillip3606

    Voicemail Transfer

    Is there a work around?
  8. phillip3606

    Voicemail Transfer

    What is the procedure for a voicemail transfer (F986) on a centralized voicemail from a remote site.
  9. phillip3606

    Centralized Voice Mail Question?

    When you call the VM DN should you get prompt to enter password? Currently getting auto attendant greeting.
  10. phillip3606

    Centralized Voice Mail Question?

    What is the correct procedure for remote user to check messages in a centralized voice mail.Unable to use f981. Could someone please enlighten me. Thankyou
  11. phillip3606

    DISA Question

    On BCM 400 4.0 Is it possible to activate call forward feature on an ext.using DISA.If not,is there a feature in the system to allow me to do this.
  12. phillip3606

    NEAX 2000 IPS QUESTION

    Does the NEAX 2000 IPS support SIP
  13. phillip3606

    BCM 50 Upgrade Question

    How long does it take to perform upgrade from rls.1 to rls.2
  14. phillip3606

    BCM 400 Voice Mail Question

    On A BCM400 can you change the main company greeting from offsite?
  15. phillip3606

    BCM50 PRI has echo

    Have Telco change DB Level At Central office to nominal.
  16. phillip3606

    Networking Question

    I currently have a BCM400 networked with BCM50e via ip. The The BCM400 is the hub,and the BCM50e is the node.I have a PRI coming into the BCM400.Is it possible to route incoming DIDS from BCM400 To the Bcm50e.If so,what is the correct programming procedure.Both switches are currently licensed...
  17. phillip3606

    BCM Password Question

    I am currently bench testing the switch and loaded a existing database into it.Somehow the username and password in database was changed.Now I cannot log into the switch.
  18. phillip3606

    BCM Password Question

    Is it possible to factory default A BCM 50,if so,will this also set passwords back to default PlsChgMe!

Part and Inventory Search

Back
Top