Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. cisco8565

    Voice Over Frame

    Question: are you installing vofr or voip over frame? 1. Connections to the pbx are based on what you want the PBX to do. I have used FXS, E&M, and T1 interfaces. All work fine. FXS will not allow you to perform extension dialing, but E&M and T1 will (depending on security, trunk access...
  2. cisco8565

    NT4WS showing up as 640 under sh ipx router

    Hello all, I have NT4 Workstations with the Microsoft and Novell clients appearing in ALL of my routers as the type 640, which is normally a Novell server. I am trying to remove my workstations as I have 2500+ computers and makes the IPX table really huge. I found a technote on Novell that...
  3. cisco8565

    3500XL - Set ports globally?

    To all, I answered my own question: Interface range is available in IOS as of version 12.1(7)XE and later.....
  4. cisco8565

    3500XL - Set ports globally?

    Fynx, Is 'interface range' something specific to a 3548? I looked into a 3524 and this choice is not available.. Bob
  5. cisco8565

    3500XL - Set ports globally?

    Good morning, Want to know if I can set ALL ports to 100/full, span tree portfast on a global basis without setting each indiviual interface. (Have about 20 3524/3548 switches to set up). [My fairy godmother found me some capital money to spend!!] Thanks, Bob
  6. cisco8565

    MSProxy2 and http ports

    I have a MS Proxy2 server and continually run into an issue where a user will need http://somesite.com:8080 and a bunch of other ports. Can the HTTP portion of proxy be modified to allow other ports? I found the Microsoft doc that refers to HTTPS, but have not found anything for HTTP...
  7. cisco8565

    anyone using WebSense

    You could run this all on one of the BDC's depending on hardware available. For this number of users MSDE is perfectly capable. (I am running my setup on MSDE, because my datafiles get huge, I would love SQL but no money) You CANNOT run this on a server with SQL 6.5 already existing, as you...
  8. cisco8565

    anyone using WebSense

    How to arrange servers depends on the following: How many users, what hardware is available, what topology, which integration, and are you using MSDE or SQL as your backend? Let me know.
  9. cisco8565

    anyone using WebSense

    Addendum to previous: I am beta testing Websense Enterprise v4.4 and found a new item. Block site by quota. This implies that a user can view the websites within specific categories for a limited period of time per day. Sixty minutes by default, but user settable. Websense automatically...
  10. cisco8565

    anyone using WebSense

    I am using Websense and have been using it for several years now. The product is very stable and does a great job with blocking or filtering of websites. Reporting is good but requires a lot of horsepower. Management of users, segments, computers is excellant and easier than stuff. For...
  11. cisco8565

    Merlin and Octel

    Hello all, I understand that in order to get Message Waiting to function on my Legend, I need ANI software activated on my Octel voicemail system. Is this true? and if so, why? Thanks
  12. cisco8565

    Voip troubles

    Marlon, Are you defining the session target statement at the loopback adapter or at the serial port? I ran into a similar situation and pointing the session target statement to the serial interface dropped approx. 150ms of round trip time. Thanks, Bob
  13. cisco8565

    Need help with VOIP Resources

    SDEG, The Cisco 'Integrating Voice and Data Networks' ISBN-1-57870-196-1 is fairly comprehensive and should satisfy the majority of questions you may have regarding VOIP or VOFR. Thanks, Bob
  14. cisco8565

    Tel-A-Greeter from Lucent

    Hello all, I am trying to install a Tel-A-Greeter 204 (Lucent) onto a g3si for 'advertising on hold'. I have the basic unit hooked into analog extensions. My G3si already has something hooked to the Music on Hold port. I am unsure what 'type' to give this unit (analog, analog-m, or...
  15. cisco8565

    Tel-A-Greeter from Lucent

    Hello all, I am trying to install a Tel-A-Greeter 204 (Lucent) onto a g3si. I am unsure what 'type' to give this unit, analog, analog-m, or analog-fd. Any assitance appreciated. Bob
  16. cisco8565

    OPX connections to a Partner?

    No, the lines are OPX from my Definity to the Merlin Plus. I am actually looking at connecting the line jacks to a Cisco router as part of a VOIP rollout. Since these are just POTS lines (tells you how much I know about a Merlin) as long as I provide dialtone to the Merlin I should be ok. Thanks
  17. cisco8565

    OPX connections to a Partner?

    I have OPX connections to a Partner and am trying to figure out what alternative connections I can have with the existing equipment? The distance (< 5 miles) and cost ($137/month) for these lines is ridiculous and I would like to replace them. Thanks,
  18. cisco8565

    MMC reinstall

    Hello all, I was wondering if someone knew a quick way to reinstall the Microsoft Management Console on Win2k server. My copy seems to be corrupted. Thanks
  19. cisco8565

    Blocking IP's Such as Hotmail and MSN Servers

    ShawnF, It sounds like your frustration level has risen to the level where you need to evaluate 'blocking' products like Websense or SuperScout. I have Websense here and it is userid based, works with most proxy servers or firewalls. I have used it with a fair amount of success to block a...
  20. cisco8565

    Netbeui traffic running through PDC

    Hello all, I have a Netbeui app running on NT4.0 server with SP6a (running NETBT using IP). I loaded network monitor on my 'client', also a NT4 server. When I run the app, the requests to my app server are showing up as being transmitted through my PDC?? (And I am receiving only 4 packets a...

Part and Inventory Search

Back
Top