Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. philhill74

    Yealink Certificates

    Worked it out, Found that the Ipo was not responding to the TLS registration requests. SIP dialogue showed that it saw the request on remote ports and dropped it. IPO LAN topology was set to One to One NAT so remote ports were disabled. Used Stun which set to full cone Nat- set remote and...
  2. philhill74

    Yealink Certificates

    Hi Guys, I have an IPOSE 11.1.2.3.0(47) - its hosted in the cloud, and I am using TLS for security. I am also installing an Yealink W90B DECT with approx 40 bases and 50 handsets. I was initially able to get the Yealink to connect using TLS with the public identity certificate from the IPO -...
  3. philhill74

    SIP Line plays Local Music on Hold (MoH) when dialing thru AA and being put on Hold

    Hi , We had this issue at a few sites with SIP lines - something to do with the transfer from the IVR to a user or group was confusing the IPO Avaya sent a critical patch for it "After successive HOLD & UNHOLD at a very fast pace, the talkpath isn''t established" This critical patch was...
  4. philhill74

    IPO One-x communicator for Mac

    Hi, If the MAC softphone version is "Softphone_Mac_4.1.1.2_CE4112c_74851" (as found in Admin 9_1_9) then this has been around since at least 2014. Unfortunately this is really clunky software - we have one site with Communicator for the Windows users and this Mac softphone for the MAC users and...
  5. philhill74

    IPO Line Lock up.

    This may be a silly question... but is the Busy Tone Detection turned on?
  6. philhill74

    9.1.5 Odd Issue

    Try deleting the phone 8 and reboot , i have seen this error also and if i remember correctly the delete and reboot fixed it
  7. philhill74

    OneXPortal - on Application server not very responsive

    Hi, I thought One X portal needed to be on the same subnet as LAN 1? Or is that only with the UCM?
  8. philhill74

    9.1 service pack 5....

    Upgraded to 9.1.5 , upgrade appeared to be stuck on reboot - after ten minutes or so completed - but there were no file uploads to SD Card. System then displayed not running on primary SD card - appears to have gone back to backup config. Second upgrade attempt ... this time files are uploading...
  9. philhill74

    IP Office rebooting constantly

    Hi , Thanks intrigrant my non responsive IPO just came back to life - was running 9.1.4 , non responsive to default with reset button, non responsive to default using debug on the rs232 . I loaded 9.0.3 ip500v2 bin file on the SD card , replacing the 9.1.4 bin file and rebooted - hey presto...
  10. philhill74

    Trunk Ports on V2 Combo Keep Failing

    Hey PM, I agree with you and support Intrigrant as one of the most helpful people here , its Nortel4Ever that i wonder what support is expected after those comments
  11. philhill74

    Voicemail Relay setup for IPO 8.1

    Embedded can get stuck on email with a failed delivery attempt , after a reboot delivery can start working again
  12. philhill74

    Trunk Ports on V2 Combo Keep Failing

    Good luck getting more help on this forum with that attitude [mad]
  13. philhill74

    Call Recording Issue

    My understanding is that with call recording it is not advised to have the call recording activated in multiple locations - ie record the call on the incoming call route , not the hunt group or the user ; or alternatively record the call only on the hunt group or only on the user. Otherwise you...
  14. philhill74

    New IPO 500 version 9.0.0.0 build 829 default password not working.

    Check secure communications (in preferences) is set to none or try R9 Manager - secure communications may be turned on in R8 Manager but the prompt to allow insecure communications does not appear
  15. philhill74

    IPO v9 stable?

    Thanks for the "day" name tip - had me scratching my head - now working [smile] - I wonder if DayAA will work again in 9.0.xxx? By the way I'm in Sydney Australia , so I guess its a global bug?

Part and Inventory Search

Back
Top