Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
Cisco 831 Router Problem
HELLO ALL THANK YOU FOR THE REPLY I GOT THE ROUTER AND ACCESSPOINT TO WORK, I JUST TYPE UP A ACCESS-LIST 2 PERMIT 192.160.1.0 0.0.0.255 AND I CAN GET TRAFFIC THROUGH MY WIRELESS AND MY LAN ROUTER THANK YOU FOR ALL YOUR HELP I REALLY APPRECIATED. ALSO HOW CAN I SETUP A FIREWALL FOR THE 831 LAN... -
Cisco 831 Router Problem
the access point is verizons is the default dsl modem model is actiontec GT-704WG, in the back of the modem is port 1-4 and a RJ-11 telephone jack, from port 1 of the dsl modem i plug it into the fast ethernet 2 interface of the cisco router. before when i did not use the cisco 831 router my... -
Cisco 831 Router Problem
how can I be able to show a topology I tried doing show ip topology but this is what it says but for some reason my wireless cannot get connectivity but it is excellent signal and it says connected. Router#sh ip topology ^ % Invalid input detected at '^' marker. Router# Router#sh... -
Cisco 831 Router Problem
hello all, my cisco 831 router is working fine, I have a couple of questions. for my LAN i am on the network 192.168.2.0 and for my wireless with verizon I am on network 192.168.1.0 but for some reason I cannot get my wireless up and running i type in the WEP encryption key and it says the... -
Cisco 831 Router Problem
THANK YOU ALL FOR EXPLAINING IT TO ME, I AM NEW TO THIS I WOULD LIKE TO LEARN MORE. ALSO THAT YOU KOKOLATAS NOW IT WORKS SO WHEN I DO SH IP NAT TRANSLATIONS THIS IS WHAT I GET Pro Inside global Inside local Outside local Outside global tcp 192.168.1.64:49647 192.168.2.3:49647... -
Cisco 831 Router Problem
thank you sooooooo much it works now, I changed the ip route command to 0.0.0.0 0.0.0.0 and the gateway now I have connectivity for ports 1 but how can i get connectivity for port 1-4, I would like to thank all of you for helping me with this, your help is greatly appreciated. Also I have one... -
Cisco 831 Router Problem
this is a continuation the the above post sorry i forgot to include it this is what happen when i did debug ip packet and debug ip nat translations. Interface IP-Address OK? Method Status Protocol Ethernet0 192.168.2.1 YES manual up... -
Cisco 831 Router Problem
Hello all, your help is greatly appreciated. Thank you very much. However I tried but I still cannot get connectivity I type up the above command in the IOS and went to the command prompt did ipconfig /release and ipconfig /renew still no ip address. I tried ping 4.2.2.1 still doesn't work... -
Cisco 831 Router Problem
Thank you very much for your help, I tried the above commands and it still dont work, I plug it into the fastethernet 1-4 but I have no connectivity. below are the configuration when I do a show run. Router#sh run Building configuration... Current configuration : 1267 bytes ! version 12.3 no... -
Cisco 831 Router Problem
Hello all, I brought a cisco 831 router and I cannot configure it to my DSL modem from verizon for home usage. Can someone please help me with the configuration on how to configure it through the CLI. I just received my CCNA as associate but never worked with cisco routers before. I am willing...
