Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  • Users: KyBoy
  • Order by date
  1. KyBoy

    Avaya future? Which system to sell/install?

    Mitel has the best business phones out there. The 5340 and the 5360 phones are sexy and love the headset attachment and wireless receiver. That is the system I want to sell now. Although the ESI is an American company the products are made in Malaysia and we had a lot of problems with the...
  2. KyBoy

    Call Recording Solution

    I have an IP office 9.1 preferred edition with voice mail pro. Currently we have a mail box set up for call recordings. The customer wants the ability to access and archive call recordings to pc using call library or call recorder or contact center not sure and cant get a clear answer from...
  3. KyBoy

    No Incoming SIP

    393431mS SIP Reg/Opt Tx: 17 OPTIONS sip:10.10.3.1 SIP/2.0 Via: SIP/2.0/UDP 10.10.3.2:5060;rport;branch=z9hG4bK520c44b49c347889f4893d20d3bddaed From: <sip:10.10.3.2>;tag=6d89f31bdf239246 To: <sip:10.10.3.1>...
  4. KyBoy

    No Incoming SIP

    I did Peter if you go up in the post you will see a monitor trace
  5. KyBoy

    No Incoming SIP

    The URI info is messed up 2 URI set up 1 via 10.10.3.2 local URI, contact, display name and PAI is use internal data- Registration pbxadmin - incoming group 18 - outgoing group 17 - max calls per channel 10. 2 VIA 10.10.3.2 local URI *, contact name *, display name * and PAI none -...
  6. KyBoy

    No Incoming SIP

    This is the only caller ID it shows 393433mS SIP Rx: UDP 10.10.3.1:5060 -> 10.10.3.2:5060 SIP/2.0 200 OK Via: SIP/2.0/UDP 10.10.3.2:5060;rport;branch=z9hG4bK520c44b49c347889f4893d20d3bddaed From: <sip:10.10.3.2>;tag=6d89f31bdf239246...
  7. KyBoy

    No Incoming SIP

    OK I am now able to see the IPO reject the call. I have a ICR DID 859219XXXX set with line group 17 to extension 229. in the SIP tap of 229 i have the DID programmed under SIP name and contact name. I have 2 URI set up 1: VIA 10.10.3.2 2: VIA 10.10.3.2 local...
  8. KyBoy

    No Incoming SIP

    Janni78 when calling from a cell I get busy. When calling on internal meta switch I get a network problem your call can not be completed
  9. KyBoy

    No Incoming SIP

    I guess everyone is SIP intolerant
  10. KyBoy

    No Incoming SIP

    I tried to header and still no inbound. I have a challenge $100 to the person that can figure this problem out with litte info mind you. Haha
  11. KyBoy

    No Incoming SIP

    Actually the call routing method is request URI
  12. KyBoy

    No Incoming SIP

    Yes I can make outbound just fine. In system status line 17 I can see peered with windstream and lines idle
  13. KyBoy

    hacked or compromised IP Office 500 V2 SIP

    Also Tell your provider to block all IP addresses except proxy. Some can do some won't
  14. KyBoy

    No Incoming SIP

    I will try it thanks
  15. KyBoy

    No Incoming SIP

    To header
  16. KyBoy

    No Incoming SIP

    333519mS SIP Reg/Opt Tx: 17 REGISTER sip:10.10.3.1 SIP/2.0 Via: SIP/2.0/UDP 10.10.3.2:5060;rport;branch=z9hG4bK82bf4e59d650c4bacd8f6d047e8c5bb3 From: <sip:pbxadmin@10.10.3.1>;tag=a8737fe54443c81d To...
  17. KyBoy

    No Incoming SIP

    Should i be able to see my phone number in monitor if the IPO is rejecting the incoming call to SIP trunk 17. i have followed Avaya application notes and cannot receive inbound.
  18. KyBoy

    Remote H.323 VS SIP trunks

    It looks like when i installed SIP trunks on IPO 8.1 (73) my remote phone stopped working. the SIP trunks were down yesterday for a while and the remote phone started working. My thought was port 5060 cant be used for both SIP and remote phone. Is it possible to use a different port for the...
  19. KyBoy

    Internal operator extension

    How do i program the MICS 7.1 when an internal user presses 0 the extension it rings to.
  20. KyBoy

    SIP Trunks

    My LAN1 is 192.168.0.16 Windstream said they are going to give me 192.168.0.17 from their session border controller for SIP I have a spec sheet from them but according to the avaya notes windstream is supposed to give me a domain name and proxy address. I'm a little confused on what controls...

Part and Inventory Search

Back
Top