Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. auburn24

    Emerald Ice directory feature

    How do I enable the directory function (press 9 in the main greeting)remotely? When you press 9, it says you have dialed too few digits and repeats the greeting. Any help would be appreciated!
  2. auburn24

    BCM 50 w/Cisco 2900

    Does anyone have experience setting up a BCM50 thru a Cisco 2900 switch? I am trying to set this up on our bench so I can test the IP phones. I have all of the keycodes loaded, the digital and analog phones are working. I am configuring the BCM using the Manager and the 2900 using the web GUI...
  3. auburn24

    Destination codes clearing...

    Yes, it is a MICS...NVRAM is release 1. The problem reoccurs when unplugged. I am going to install a FastRad so I can back up the programming and install a new software cartridge. Thanks for all the input!
  4. auburn24

    Destination codes clearing...

    I have a good one...on a CICS/7.0 with PRI, when the system is shutdown (due to power outtage) the systems clears the destination codes, everything else comes up fine. I reprogrammed the destination codes...9 any, route 1, absorb=01 and everything worked, customer can make calls (which was the...
  5. auburn24

    Long distance problem

    That is very interesting...both were set for NI-2 and I couldn't make outgoing calls, so I was told to change it to 5ESS. This solved the outgoing call issue, but seems to have caused another with the LD/TF. I will try changing it to the other types and see what happens. Thanks!
  6. auburn24

    Long distance problem

    Thanks...but if I set asborb to "all" it will send the 9, and and if I send "none" it won't send anything. As I have been researching the other posts, do I need to build a seperate route for LD/TF? Then program each 91xxx? This is a fractional T1 using 6 lines for voice...it is straight...
  7. auburn24

    Long distance problem

    Just installed a PRI on a MICS w 7.0...everything works except dialing "1" for LD or toll free. To make a call you press ITCM,9,then dial the number. When I dial LD or TF I get the message "you must dial 1 and the area code for this number." I have the routing set up, Route 1 to PRI-A...

Part and Inventory Search

Back
Top