Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. Smerlap

    mminfo query "full" in 7.3.2

    Hi, With networker 7.3.2, the mminfo query "full" don't return any match. You can find this example in the command reference guide (or in man page of mminfo): "Display a media report of all non-full volumes, showing the percent-used, pool and location of each volume: mminfo -a -r...
  2. Smerlap

    No tape Label found

    Finally, the networker solution will be re-install, because too many problems : one month ago, when the administrator move the networker server from Tru64 to Linux OS, he just copy the nsr directory to the new machine ! Many thanks
  3. Smerlap

    No tape Label found

    Thanks, The device block size is set to variable (0). I don't know how to set block size in Linux, because the stinit.def is not loading in the system. Do you have an idee ?
  4. Smerlap

    No tape Label found

    Hello, No problem, CDI is disabled. We have mount and unmount 40 different tapes from the librarie, and the 41ers was read without problem ! All this tapes were writing when the Networker server was running on Solaris. Now all seems to be running well but we always have those messages in the...
  5. Smerlap

    No tape Label found

    2 other drives failed with the same error message. But the dmesg from Linux gives some errors like : st3: Error with sense data: Info fld=0x0, Current st3: sense key Medium Error Additional sense: Write error st3: Error on write filemark... OS can't speak correctly with drive.
  6. Smerlap

    No tape Label found

    With a new tape, networker is unable to label it. It's the same error with any tapes. All drives in L700 jukebox are Quantum SDLT320. Just a strange thing : last week mt -f status on the drive give : root@usu>mt -f /dev/nst4 status SCSI 2 tape drive: File number=-1, block number=-1...
  7. Smerlap

    No tape Label found

    Many thanks for your answer, Here is the result of scanner (no error with mt -f status) : root@usu>nsrjb -lnv -S 677 -f /dev/nst4 setting verbosity level to `1' nsrjb: Info: Loading volume `-' from slot `677' into device `/dev/nst4'. root@usu>scanner -v /dev/nst4 scanner: /dev/nst4: opened...
  8. Smerlap

    No tape Label found

    Hello, After adding a new SDLT320 drive in jukebox L700, networker load a volume in this drive, but label verification fails on this error : nsrd: /dev/nst4 Verify label operation in progress nsrmmd #6: tape_bsf bsf failed: drive status is The drive is not ready and the reason is not known...

Part and Inventory Search

Back
Top