Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  • Users: esys8
  • Order by date
  1. esys8

    Digital Phone with SIP Trunk?

    Hi obt, I have setup IPGW before using DN2IP entry over VPN and with the same PBX & card. Now have NS500 on our end and the other end is different make&model PBX. Can this be achievable using IPGW? If yes, i assume configuration will be similar? at least on the NS500 end. On NS500, I believe...
  2. esys8

    Digital Phone with SIP Trunk?

    i can see 'SIP over TCP/IP' in feature manual. Can't find any more info on this. Mind to share?
  3. esys8

    Digital Phone with SIP Trunk?

    Hi again, I now understand SIP trunk. Are there any features to connect end to end PBX with SIP-GW? What do i need in terms of hardware/AK? The objective is to have both pbx connected and able to call using ext. number. Or is it IP-GW that im referring to? [ponder]
  4. esys8

    E1 line, hunting, DID basic settings for NS500

    Hello guys, Updates; Card Property Line Coding: AMI (A) Frame Sequence: PCM30 (B) Frame Option: C=0, D=1 (C*) Port Property Trunk Property: Public CO Dial Mode: DTMF (C*) E1 Receiver Type: Undefined (C*) with current settings now, E1 cards shows 'Normal' and 'Syncronised', yet still getting...
  5. esys8

    E1 line, hunting, DID basic settings for NS500

    Hello, Need a bit of advice on common and basic settings for E1 CO line, hunting, DID, I have connected our new E1 from ISP mux to our E1 card and I can see E1 card status is normal & synchronised. Going to the E1 port settings, all 30port shows 'Fault' I tried to set an extension with one of...
  6. esys8

    Analog CO switchover to PRI

    Hello, So my company has upgraded our 40x analog lines (dying copper) to PRI E1 (after long thought on SIP). We have installed 1x PRI30 on our NS300+1NS320. ISP guy delivered and installed their AMS 16 port multiplexer, connect with a spare core of fiber optic (spare from our leased line / same...
  7. esys8

    Digital Phone with SIP Trunk?

    Hello.. i'm new with SIP services, we have plan to subscribe for SIP trunk. Can we use any digital phones (KX-DT521) to use SIP trunk for inbound/outbound call? Or we will need SIP phones + SIP Ext license? [ponder] *add* Out of curiosity, how about SIP phones use legacy analog CO? Will...
  8. esys8

    KX-NS700 - Manuals

    Hello! Anyone have any manuals related to subject? Downloaded from panasonic(net), it is password protected, or someone to share password perhaps? -Feature Manual -Installation Manual -PC Programming Manual -PT Programming Manual -Operating Manual Appreciate it! Regards..
  9. esys8

    KX-TDA100D Version Upgrade Guide

    No worries, I got it sorted out, i missed another step to load the file to the card! Now everything tested, DLC16 Firmware, DHLC8 Firmware, MPR Programme Card Firmware, DT5xx Series Telephone Firmware, all are working perfectly now after those upgrades. Thank you and appreciate for the...
  10. esys8

    KX-TDA100D Version Upgrade Guide

    Thanks for the files. Here what i have done :- 1. Transfer bin file PC to PBX 2. Set DLC16 Card to OUS 3. File View and Load 4. Load the file into the card *** From here how do i load the file into the card? on step (4) i put the card back to INS - Version remains the same, Version 7.004
  11. esys8

    KX-TDA100D Version Upgrade Guide

    Your Welcome.. Sorry, i don't really get you.. Where should i get the .bin file you mention, how should i use/upgrade the dhlc_v0801.bin? I have done initialize reset > connect using your latest maintenance console (UPCMCv7.8.1.1) > card firmware remains the same as below. Please advice...
  12. esys8

    KX-TDA100D Version Upgrade Guide

    Here you go, the firmware that our dealer provide to us.. https://www.dropbox.com/s/jd8et1iihcph8wo/FIRMWARE_TDA100%2C200%2C%20100D%2C%20TDE100%2C200.zip?dl=0 KX-TDA100/200 Version 5.01 KX-TDA100DXE Version 5.2 KX-TDE100/200 Version 8.0
  13. esys8

    KX-TDA100D Version Upgrade Guide

    UPDATES! 1. Got our TDA100 upgraded to Version 5.01 (Required for DT5xx Phone) 2. Connect to existing card (DLC16) - Problem still persist, telephone display still shows 00000, buttons not working, no ring tone 3. Connect to existing card (DHLC8) - It is working fine!! DLC16 (KX-TDA0172)...
  14. esys8

    KX-TDA100D Version Upgrade Guide

    Right! I just got the firmware 5.01 for TDA100, 5.2 for TDA100D from dealer which will support the DT5xx series phone, which is also mentioned in the DT5xx manual. Will confirm this today after firmware upgrade. Thanks for the input guys!
  15. esys8

    KX-TDA100D Version Upgrade Guide

    Yepp..Got it from your link :) UPCMCv7.8.1.1
  16. esys8

    KX-TDA100D Version Upgrade Guide

    Yea.. The DT5xx Series PT works on below ; TDA100 Version 5.01 above TDA100D Version 5.2 above Tested on both PBX anyway.. I got our TDA100 on 5.01 above (Which meets the requirement) Yet the DT5xx Series PT not really working properly.. it still showing 0000 in the display, buttons are not...
  17. esys8

    KX-TDA100D Version Upgrade Guide

    TheCoreWithin I manage to get the DHLC8 work with GREEN LED and are able to configure after the INITIAL RESET Soon after i restore my old DSYS (PC-SD/PBX) > Reset by command > Skip Save > Replace DSYS > Restart The DHLC8 card back to not working and shows status "FAULT-DIF" I would still like to...
  18. esys8

    KX-TDA100D Version Upgrade Guide

    Yep,, currently our TDA100D is on V5.1 Ok, here is the steps you provided in the other link.. I have write a comment in CAPS 1> in programm click the safe config - CAN'T FIND THIS OPTION ANYWHERE 2> SET SVM / to OUS - WE GOT NO SVM, SO IGNORE.. ------ 3> Transfer File to PC ( DBSYS ) -...
  19. esys8

    KX-TDA100D Version Upgrade Guide

    Thanks for the input.. Now i will need PUMC Version 8? Tried looking for it, luck got me to 7.2x only.. Any site available? Did you just mention DHLC8 card? Yes, I have just installed a DHLC8 card, it show RED led and status FAULT-UNACC FAULT-UNACC appeared as status when installed in...
  20. esys8

    KX-TDA100D Version Upgrade Guide

    Hi, As per subject, It seems like i am unable to find any details on upgrading PDMPR Versions from 5.1 to 5.2.. I will need to upgrade the version due to compatibility for KX-DT521 PT.. Currently PT does work, yet with some problems, eg. Display shows "00000000" and all buttons, flexible...

Part and Inventory Search

Back
Top