Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. hiasor

    snmpinfo gets "noSuchName at position 1

    now it's working. chssys -s snmpmibd -a "" chssys -s hostmibd -a "" chssys -s aixmibd -a "" stopsrc -s snmpd stopsrc -s aixmibd stopsrc -s snmpmibd stopsrc -s hostmibd startsrc -s snmpd startsrc -s hostmibd startsrc -s snmpmibd startsrc -s aixmibd snmpinfo -m dump -v -h localhost -c public -o...
  2. hiasor

    snmpinfo gets "noSuchName at position 1

    Thanks xyz786, but it isn´t still working >snmpinfo -c hacmp -m dump system unable to locate object parent "ibmAIX.1" for "aixSystem"
  3. hiasor

    snmpinfo gets "noSuchName at position 1

    hi xyz786, can you send me please a changed snmpdv3.conf file? thanx!!!
  4. hiasor

    tcpdump and etherchannel

    Hi, is that what you are looking for? netstat -vn | grep -i -E "Link Status|ETHERNET STATISTICS|Port operation" or try entstat -d "ADAPTER" eg. entstat -d ent10
  5. hiasor

    pSeries Virtualization and VLAN Tagging

    deto! power5/6 570 power6 595
  6. hiasor

    keeping each LP copy on different storage box

    Hi, you can also use migratelp Usage: migratelp lvname/lpartnum[/copynum] destpv[/ppartnum] Migrates a single logical partition. but it´s not the best way ... ;-)
  7. hiasor

    snmpinfo gets "noSuchName at position 1

    Hi all, I have a problem with snmb, so clstat is not working /usr/sbin/snmpinfo -h localhost -c public -v -o /usr/es/sbin/cluster/hacmp.defs nodeName noSuchName at position 1 same Error with nodeTable instead of nodeName. I have enabled the main internet MIB entry by adding this line in...
  8. hiasor

    need command

    bootinfo -s <hardiskname>
  9. hiasor

    problems with NFS mount

    what say´s the lssrc -g nfs output? is lookup a hostname from an IP address and reverse IP address from the hostname ok? cheers, hiasor
  10. hiasor

    Problem with carriage return

    you can try dos2unix or cat filename|sed 's/'`echo "\010\013"`'/'`echo "\013"`'/g' > filenew or cat ${filename} | tr -d '\r' > ${filename}.new or sed -e 's/^M//g' $input_file > $input_file.fmt or sed -e 's/[^ -~]//g' $input_file > $input_file.fmt
  11. hiasor

    10Gb NetXen Adapter with 1Gb Bandwith

    we testet only over ip and with nfs. we also have tried tcp and udp. and we testet with multi-threads so the cpu usage isn´t the limiter. has anyone expirience with 10Gb over Fibre. because it looks like 1Gb half duplex. we see sending pakets and then recive. kB/s kB/s out write...
  12. hiasor

    10Gb NetXen Adapter with 1Gb Bandwith

    @Tony: and as I wrote before, we testet only over IP - no disks involved - the same result
  13. hiasor

    10Gb NetXen Adapter with 1Gb Bandwith

    @Tony: it´s only one Diskpool with 72 disks. The disk´s aren´t the limiter.
  14. hiasor

    10Gb NetXen Adapter with 1Gb Bandwith

    I write from NFS-Share to NFS-Share (single and multithreaded) also only over IP. (single and multithreaded) It should be a minimum of 600MB/sec.
  15. hiasor

    10Gb NetXen Adapter with 1Gb Bandwith

    ANY IDEAS???
  16. hiasor

    10Gb NetXen Adapter with 1Gb Bandwith

    Hi Tony, we only want to test nfs. so we tried different mount settings (rw,hard,intr,fg,tcp,rsize,wsize,jumboframes, kernel parameter, etc.) on NetApp-side we have also tried different settings -> no impact NetApp side is idling. may be its a comminication problem, because it´s direct attached.
  17. hiasor

    10Gb NetXen Adapter with 1Gb Bandwith

    Hello All! I tested a 10Gb NetXen Adapter (HP NC510F PCIe 10 Gigabit) on DL785 with a NetApp FAS 6080 10Gb Adapter -> direct Attached over Fibre (server to server) But i get a maximum of 140Mb/s trough the Adapter. that´s too slow. I have testet different RHEL Kernels, different adapter...
  18. hiasor

    invalid lv type after restore

    after exporting and importing a vg the lv type and the permissions were lost, when the lv type is not jfs jfs2 and so on
  19. hiasor

    Clstat

    U a rigth Polani!!!
  20. hiasor

    rootvg is missing - can anyone help to find me?

    Hi all! I solved the problem - but I didn´t know how... with redefinevg it works, but at beginning I already tried a redefinevg and it doesn´t work. So I could only say, I am happy now. thanks!

Part and Inventory Search

Back
Top