Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Search results for query: *
- Users: BarryNelson
- Order by date
-
ML380 raid array setup problem!
Ok, found the problem looking at the diagrams, the small raid addin board is missing from the motherbaord! Explains it all, thought i was going mad! When i bought the server it was advertised as having intergrated raid but obviously someone has removed the board - explains why the disks were...- BarryNelson
- Post #17
- Forum: Servers
-
ML380 raid array setup problem!
i can only see 2 scsi ports on the motherboard, scsi int port 1 & scsi int port 2.. The disk array/caddy is plugged into port 1, port 2 just has a cable & terminator on it. Is scsi port 1 the raid port?- BarryNelson
- Post #15
- Forum: Servers
-
ML380 raid array setup problem!
have tried the manual config - ACU does not run via that route- BarryNelson
- Post #13
- Forum: Servers
-
ML380 raid array setup problem!
have erased system partition again, installed smartstart 5.5 & your step 3 does not come up. Get "select desired smartstart path" - where you can choose assisted, replicated or manual configuration (for installing an OS)..- BarryNelson
- Post #11
- Forum: Servers
-
ML380 raid array setup problem!
it looks like: Integrated Smart Array Controller LSI Logic® Integrated SYM53C1510 , SCSI-2- BarryNelson
- Post #10
- Forum: Servers
-
ML380 raid array setup problem!
currently they are setup as 2 seperate disks. xp wont install as i have not found a scsi raid driver for it. Obviously what i am after is to get the disks mirrored & then install the os. Just cant understand why the compaq raid config wont work.. Is it ment to boot somehow off the raid config...- BarryNelson
- Post #8
- Forum: Servers
-
ML380 raid array setup problem!
yes disks are seen - there is no raid parition - as this was wiped during erase procedure. Disks are ok as smartstart system paritiion has been written to them... f1 is for bootup .. or f10 for system partition utils - surely f1 comes up as there is no boot partition on the disks..?- BarryNelson
- Post #6
- Forum: Servers
-
ML380 raid array setup problem!
yes i have the latest bios, used the update maintenance disk Does anyone know exactly how it should work when using the drive array configuration utility?- BarryNelson
- Post #4
- Forum: Servers
-
ML380 raid array setup problem!
Sorry it should say a DL380 not a ML380 server! (Cant find a way to edit my post..)- BarryNelson
- Post #2
- Forum: Servers
-
ML380 raid array setup problem!
Recently bought ML380 G1, downloaded smartstart 5.5 cdrom, erased system with disk, re-setup from smartstart cd but when i select the drive array configuration from the menu, it says insert floppy & system will reboot but nothing happens after re-boot when i press f1 (to boot) or f10 (for system...- BarryNelson
- Thread
- Replies: 16
- Forum: Servers
