Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. pedropb

    INADS

    Hello all !!! Sorry if this question sounds dumb but what does INADS and DS1 means and if you can explain a little much better... Thanks in advance !!!
  2. pedropb

    Vector Redirect Call

    Hi to all I changed some configuration in the co trunk page in the part Trunk Type the trunk was Ground-start, y changed fot "loop start" and it worked !!! Thanks a lot to all of you!!!
  3. pedropb

    Vector Redirect Call

    The call come in, on the trunk 813, and the call are redirected to the vdn in the "incoming destination" space in that space i specified the vnd number, and once in the vector i tried to make the call calling TAC of another trunk then i use diferent trunks to the routing in and out of the call.
  4. pedropb

    Vector Redirect Call

    HI Responding to your questions the trunk transfer options is set to all. the vdn COR are with privilegues to made the call and when i point one DID/DDI straight to the TAC, it works i don't understand why does not work with the outside call.
  5. pedropb

    Vector Redirect Call

    When i call the vector from my station, make the call and works , but when i tried to make it with te incomig trunk configuring the co trunk Inconming destination that vector, does not work... it's driving me crazy!!
  6. pedropb

    Vector Redirect Call

    this are the trace vector result time sec st data 18:22:20 6 1 vdn e1003 bsr appl 0 strategy 1st-found overrive n 18:22:20 6 1 18:22:20 6 2 route-to 18:22:20 6 3 wait-time 18:22:20 6 33 stop 18:22:20 6 33...
  7. pedropb

    Vector Redirect Call

    Hi Stinney first of all, thanks for your comment answering to your questions. Yes the VDn has a COR with the sufficient provileges to make the call, and the 805 at the first of the string are the TAC of my principal trunk in that case i don't need to use the 9 to call the ARS, i have another...
  8. pedropb

    Vector Redirect Call

    This is the whole vector. Call Vector Number:5 Name:ATT CEL Multimedia? n Meet-me Conf? n Lock? Basic? yes EAS? n G3V4 Enhanced? n ANI/II-Digits? n ASAI Routing?n Pronpting? y LAI? n G3V4 Adv Route? n CINFO?n BSR?n Holidayz?y 01 Wait-time 0 secs...
  9. pedropb

    Redial Authorization Codes

    thanks smokinjoe2938 i will try and notify you if this works. Thans again !!!
  10. pedropb

    Vector Redirect Call

    Hi to all... I have the following problem: I have one vector that is a menu to redirect the external calls to an specific extensions or operator, etc, the classic menu, what i want to do is to force when, someone call and dial the 8 number in the vector menu, redirects the call to a cellular...
  11. pedropb

    Redial Authorization Codes

    Hi to all!! The scenario is the following i hope any of you can help me. I have an Avaya Derinity G3 Version 11 and i managed it with ASA, i have the extensions blocked when any user needs to make a call outside of the plant, they have an Authorization codes, but in the analog extensions and...
  12. pedropb

    Configuring CO Trunk

    Hi dtlegend123 this is the configuration of my trunk group, it seems like yours but i still got the problem, i include the Vector that do the collection of the extension to see yif there is anything wrong display trunk-group 13 Group Type: co Trunk Type: ground-start TRUNK PARAMETERS...
  13. pedropb

    Configuring CO Trunk

    Hi to all! System: Avaya Definity G3 V11, managed by ASA I recently connected an analog line in one TN747 CO Trunk card, and configured one new CO trunk-group, this trunk group receive's the call with a vector who gives a message and collects an extension number to redirect the call to a...
  14. pedropb

    Delete Create list of authorization code

    Thanks gabber4858 for your help It Worked, the problem was that i was doing it when i was logged in, i followed your steps and it worked just fine, Thanks a lot for you help
  15. pedropb

    Delete Create list of authorization code

    Hi to all This is my first post in Tek Tips i hope i'll do it good. My problem is i need to erase about 300 authorization codes and generate new ones i know how to do it one by one with the command remove authorization code XXXXXX or add authorization code XXXXXX but i am wondering if there is...

Part and Inventory Search

Back
Top