Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. Pompies

    WAN port for SIP trunk

    Looks like you cant. ALSO HAS A 10/100 WAN PORT THAT IS AN “INTERNET GATEWAY” • WAN port provides connection to an ISP for Internet access (e.g., DSL or cable) • WAN port provides NAT and firewall capabilities • WAN port does not support IP networking
  2. Pompies

    Mitel 3300 MXe drops connection after 10 min.

    Strange one, all phones connected to Mitel controller displays "contacting server". Reboot the Mitel and phones connect again. After about 10 min same issue. Logs shows phones disconnecting from Mitel. - I've reloaded the latest code - same issue. - Connect Mitel to stand alone switch with 2...
  3. Pompies

    One way speech over SIP trunk.

    Turned out to be an issue on the Service Providers side. Thanks for the help.
  4. Pompies

    WAN port for SIP trunk

    Is it possible to use the WAN port on the Mitel controller to connect to a SIP trunk?
  5. Pompies

    One way speech over SIP trunk.

    Client has a SIP trunk through IS and has the following issue. • If we call a switchboard and select an option (eg: press 1 for maintenance, press 2 for accounts etc.), we select a number, it rings, when the person answers, they cannot hear us. • If we call a supplier such as BT, where the...
  6. Pompies

    Mitel Cluster Speed Dial sync fail.

    Hi, Client has 2 Mitel's in a cluster. Speed dial numbers are shared between the controllers. For some reason when I add the Speed Dial numbers on the main controller I'm unable to dial them from an extension on the remote controller. When I delete and add the Speed Dial numbers again it works...
  7. Pompies

    Call Forward to display directory name and not number.

    Hi, I've created a Ring group - 100 with the name "Test" ( added in the telephone directory) which needs to forward to another extension - 101 when not answered within 15 seconds. When the call forwards to extension 101 it displays the number of the Ring Group. Is there a way to get the name...

Part and Inventory Search

Back
Top