Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  • Users: gerryscot
  • Order by date
  1. gerryscot

    bcm 50 no data

    Hi Guys, It's me again. I still have problems with bcm 50s. One of them powers up, the yellow leds stay steady then go solid red, then both leds flash red. I bought a bcm 50 which worked fine, so I swapped the good hardrive into the faulty unit. Needless to say it made no difference, but here's...
  2. gerryscot

    bcm 50 no data

    Hi there, Can't ping any ip addresses, because the machine refuses to talk to laptop.It does connect, but there is no . Level 2 reset doesn't make any difference. Removed hdds and checked them on computer for bad sectors or any corruption, but both seemed fine.I borrowed a bcm400 to get element...
  3. gerryscot

    bcm 50 no data

    Hi (again), I tried to communicate via laptop element manager on the bcm50 switch, and nothing. when you put ip address in it just says detector"bcm detector cannot find device type" Is the system goosed? Thanks in advance, Gerry
  4. gerryscot

    bcm 50 no data

    Hi Again, thank you all so much for taking time to answer my query and for your patience. To be honest, if I get one exchange working out of three, I'll be well pleased.(I have another one with both leds staying yellow on power up, and have been told the that the hard drive is faulty, although...
  5. gerryscot

    bcm 50 no data

    Hi, many thanks for reply. I tried level 2 reset, and leds went through sequence until both red, but after about ten minutes the green leds flash, then the system goes back to power led green(steady) and status led yellow(steady). I have noticed that the green leds above the 4 RJ ports flash...
  6. gerryscot

    bcm 50 no data

    Hi All, I've got 2 BCM 50 units with same fault.When you power up the system, the power light goes to steady green, but status light stays yellow. I've tried reset, and I've even swapped the hdd drives, but no difference. Thanking all in advance.

Part and Inventory Search

Back
Top