Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  • Users: Nuna3
  • Order by date
  1. Nuna3

    Unconnected site to join domain later

    This is the North-we have to wait that long for the routers to thaw out so we can use them...just kidding! I'll have the routing issues resolved before then, but I have my wrk cut out for me on a number of other issues; our sites are widespread and can only be reached by plane; weather...
  2. Nuna3

    Unconnected site to join domain later

    I'm bringing up a server 2003 site with about 30 users right now; it's still not connected to the domain, due to routing issues. Everything is set up as "workgroup" at this time, but now I want to set up backups, and need to protect the shares on the desktops. The only way I can think of is to...
  3. Nuna3

    Contivity VPN from inside Pix

    Thanks for weighing in on this one, boymarty24. I tried the fixup protocol, no luck; removed it again. I have been in touch with Aliant, they are the service provider here, and they have set up NAT traversal mode on their VPN concentrator, or so they say. No difference yet...will keep you...
  4. Nuna3

    Contivity VPN from inside Pix

    Microdude; tried that; didn't work for me. boymarty24; no ACL's from inside out. (Someday, when I undrstand this stuff better, ther will be.) When I try to VPN out, the adaptor gets a 22. address momentarily; for about 24 seconds, then loses it. Thanks for the interest. Here's my sanitized...
  5. Nuna3

    Contivity VPN from inside Pix

    Our CFO used Nortel Contivity to VPN to a remote site. Now we changed over to Fibre and put in a PIX 515E, and he cannot connect using Contivity any more. He's connecting through Phase 1, but Phase 2 fails. I have opened Port 500 (udp), which enabled the Phase 1 to work, but have no idea...
  6. Nuna3

    DMZ to Inside Port 3306 access; and FTP

    The more I learn about Pix 515, the more I realize how little I know...3 Problems; possible interconnected... I'm trying to get gisserver (DMZ) to communicate with 10.10.2.2 (Inside) on port 3306. (Mysql) I can ping both ways between these servers. Telnet will connect from 10.10.2.2 to...
  7. Nuna3

    Pix 515-No ping from DMZ

    I kinda' thought that once I had the ping fixed, it would also create connectivity for the other thing I need: I need port 3306 on 192.168.0.3 (dmz) to talk to port 3306 on 10.10.2.2 (inside). This didn't miraculously happen at the same time, much to my consternation...You're 100% on the fixes...
  8. Nuna3

    Pix 515-No ping from DMZ

    It worked perfectly, NetworkGhost! Thanks ever so much! Lowell Barkman. MCSE,A+. Network Administrator for the Nunatsiavut Government.
  9. Nuna3

    Pix 515-No ping from DMZ

    Here's the config; thanks for the help! : PIX Version 6.3(5) interface ethernet0 auto interface ethernet1 auto interface ethernet2 auto nameif ethernet0 outside security0 nameif ethernet1 inside security100 nameif ethernet2 dmz security50 enable password cMdDMJ3V4e7ljwK/ encrypted passwd...
  10. Nuna3

    Pix 515-No ping from DMZ

    I've enabled ping with the following access-lists: access-list acl_out permit icmp any any access-list acl_dmz permit icmp any any I've bound these access lists to the outside and dmz interfaces with the following access-groups: access-group acl_out in interface outside access-group acl_dmz...
  11. Nuna3

    Pix 515 Access-List issues?

    I've been setting up my first Pix for 2 weeks, now, and the more I look at this configuration script, the more it looks right! (But it's not)Set up: inside, outside, and dmz. Allow internet access to the 2 servers (gisserver 192.168.0.3 and server2 192.168.0.24) in the dmz; gisserver has to talk...

Part and Inventory Search

Back
Top