Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  • Users: DMWSr
  • Order by date
  1. DMWSr

    Forwarding an incoming PRI DID call to a cell phone without an attached phone

    Between all these posts, we got it to work. The remote package was the key. Thanks, "DBrewsky"!!!!!!! So it's destination code, route, remote package. Put them all together and we're golden!!!
  2. DMWSr

    Forwarding an incoming PRI DID call to a cell phone without an attached phone

    Hi, "hawks". Tried your suggestion, but the system won't let me assign a destination code that has matching digits for a target line. Need a little clarification on the dial out number. I've selected PRI-A for the pool since there is only one PRI. So the calls are coming in, for example, on...
  3. DMWSr

    Forwarding an incoming PRI DID call to a cell phone without an attached phone

    Thanks "fonegal". The CCR tree is a really good idea. Trying to avoid the extra hop as well as the phone in the closet. I realize the MICS isn't a complex system, but I'm hoping it can do the redirect without the CCR transition or phone set. Your input is definitely appreciated and those...
  4. DMWSr

    Forwarding an incoming PRI DID call to a cell phone without an attached phone

    Working with a Norstar MICS 6.1. Would like to hard code forward inbound calls to a specific DID back out to a cell phone by redirecting the call internally without a phone attached. Seem to remember doing something similar with two MICS tied together so I applied the same logic using...
  5. DMWSr

    Connecting two MICS back to back - same location

    Yes, we have used all available expansion ports. Since this writing, we were able to locate a vendor in the vicinity of this site with installations of this nature. They will be assisting us with the installation. Thanks so much for the response.
  6. DMWSr

    How to Change Outbound Caller ID my Norstar T7361E?

    You can do this unique to each phone/DID. Your administrator will need to complete this request. Not something you do from your phone. Have them log in, go to Telephony > Sets > Active Sets. Tab is "Line Access". Select your extension and then the "Properties" tab. "Pub. OLI" is the first...
  7. DMWSr

    Connecting two MICS back to back - same location

    We have a site with a MICS 7.0XC installed that is out of ports. Considering adding a second MICS using a T-1 connection for additional ports. Does anyone have experience with this type of an application that can provide some "caution" and "beware of" items that would be good to know before...
  8. DMWSr

    Moving an ANS DN button on a BCM-400

    I was afraid of that. Thanks.
  9. DMWSr

    Moving an ANS DN button on a BCM-400

    Does anyone know how to move an answer DN button on a BCM-400. We've tried FEATURE *81 and it's not working. Everything I can find in the documentation indicates this cannot be done - but the admin at the site insists the button appeared in a different location from where it is. Her faceplate...
  10. DMWSr

    Restricting all but internal and 911 calls - MICS 6.1

    Sounds like a good idea to add a restriction for *67 to that filter. Can't hurt. Thanks for the heads up! Appreciate your confirmation on the filter programming.
  11. DMWSr

    Restricting all but internal and 911 calls - MICS 6.1

    So then I would be: Restrict: A Override: 911 On a set filter, this will allow only internal and 911 calls. Correct?
  12. DMWSr

    Restricting all but internal and 911 calls - MICS 6.1

    Can anyone confirm restriction and overrides for a filter to only allow internal and 911 calls from a phone set. We want to restrict calls from a shop floor so calls cannot be placed off site - except 911. I'm using filter 05 and think it should be: restrict: 9A override: 9911 Is that...
  13. DMWSr

    SMDR

    CDR is Call Detail Recording. You still need to have the SMDR to capture and send data to the recording system. We use MicroCall. www.microcall.com SMDR sends call data to a MicroCall buffer instead of a printer. Buffers are on the LAN and dump data to the main computer on a real time basis...
  14. DMWSr

    PRI Lost Calls

    Just a wild stab - but do you have anything in the Business Name field (in System Programming)? We've seen this mess things up as some carriers are not equipped to handle this data from the phone system. Not really a critical field to have programmed so you should leave it blank.
  15. DMWSr

    Hacking a Norstar MICS

    Sure do appreciate everyone's input. The system that was hacked had three openings that we feel were the cause of the penetration. The input from everyone confirmed we were not missing any area that could allow an opening. Redirect was allowed, voice mail ports were not restricted, outcalling...
  16. DMWSr

    Hacking a Norstar MICS

    Thought about deweyhumbolt's reply concerning message notification. I can restrict the voice mail ports to local and toll free (01) and allow an override to a specific parameter if the user needing notification has a mobile device with a number outside the local calling area of the phone...
  17. DMWSr

    Hacking a Norstar MICS

    Thanks!!! All info very helpful. Tells me I'm looking at the right things and you all have provided some additional areas. Really appreciate the help!
  18. DMWSr

    Hacking a Norstar MICS

    CallPilot 150 ver3.0
  19. DMWSr

    Hacking a Norstar MICS

    We recently had a Norstar MICS hacked resulting in numerous calls to off shore locations. Would like to be sure that I have checked / closed all possible areas where a phreaker could get thru the system and place these calls. Would anyone be able to provide areas to watch, settings to check...
  20. DMWSr

    Call Pilot 150 database defaulting on it's own

    That is what I thought - but it is on a UPS. The phone system, and UPS, are less than 2 years old. We have an APC Smart-UPS XL1500VA with a SUM48RMXLBP2U add on battery. I would think that would be enough to protect and power a MICS, 7 0X16 and 4 0X8A station mods, CP150, SMDR, RAD, and music...

Part and Inventory Search

Back
Top