Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. resetsys4

    CM Version

    Just in case you didn't know you can get system manager to go off and find all the latest , patches firmware etc etc as long as you have the device configured, you can then deploy at will , doesn't really answer your original question , we usually install to major release upgrade to the service...
  2. resetsys4

    Session Manager 6.3: Reduce Size of SIP INVITE Packet

    Of course if you truly dont need the CM features, turn of ims on the sig group (or create a new one ) then tinker to get the phones to do what you want routing wise.
  3. resetsys4

    Session Manager 6.3: Reduce Size of SIP INVITE Packet

    I had recently where we upgraded the core to 6.3 and a remote g 700 to a g450 , the 450 just would not register , customer convinced that the G450 was faulty so I forced the s8300 server in the new g450 into lsp , with suspected faulty g450 , registered straight away , so then wiresharked it and...
  4. resetsys4

    1603-1 won't register after subnet change

    Is the ip network map populated with the change in cm as asked above? , might be good to create a new network region also for ease of I'd and troubleshooting.

Part and Inventory Search

Back
Top