Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. Godfather8777

    PRI

    Thanks for the input..After everything I've read and from what you guys have told me, I'm contacting vendors. There are just to many things I would have to 'guess' at or have some trial and error, and being for the military, those aren't good options. Thanks again to all of you for the input.
  2. Godfather8777

    PRI

    @KCFLHRC..I'm pretty sure they are making them 23 2wy, but I didn't see an option when building a PRI for two way in the M1. I saw Tie,DID....and what not, but nothing for two way. With my lack of knowledge..I was just gathering what I could from reading different things and I"m sure there is...
  3. Godfather8777

    PRI

    @Trvlr1..this is a remote site in a different area code. All calls made locally here to there go through my DID's and get routed through my switch via the Tie trunks. The only thing the DID's and COT's are used for down there are local calls to and from that area. Hope that makes sense...
  4. Godfather8777

    PRI

    @hawks..will it ask for me for the RLI while I'm building the PRI? The thing I'm concerned with is, half of the T-1 is going to be for the DID's and the other half for the COT's..or do you just build the new PRI as a two-way? Will I have to do any routing for the incoming DIDs. I need to log...
  5. Godfather8777

    PRI

    Thank you all for the info. I can't have the Telco move the DID's over to the existing PRI because those two PRI are simply Tie trunks between my CO and that one. The only thing the COT's and DID's are used for are local calls to/from that area. All other calls route through the tie trunks...
  6. Godfather8777

    PRI

    The site is about an hour away...so I can't just take a peek to see how everything is wired. I do know that the existing PRI's are plugged into the Dual PRI card via and RJ-11 line cord. I haven't been there in a while..so this is off the top of my head.
  7. Godfather8777

    PRI

    Folks, I'm trying to find out how hard it is to convert 6 analog DID's and 5 analog COT's over to a PRI. I'm not an SL-1 guy so please dumb this down as much as possible. I have a dual PRI card in Core 0 which has our two current PRI T-1's on them now and I have a Dual PRI card in Core 1 that...
  8. Godfather8777

    Need Traffic Study Assistance PLEASE!!!!

    Thanks GH...
  9. Godfather8777

    Need Traffic Study Assistance PLEASE!!!!

    Just one more thing...Does this report overwrite itself every day at midnight or is it 24 from the time the report started? Thanks again guys.
  10. Godfather8777

    Need Traffic Study Assistance PLEASE!!!!

    Thank you two so very much. You just made my life a whole lot easier. GHTrout...thank you so much for your help. Bhassell..thank you for your response also!!!
  11. Godfather8777

    Need Traffic Study Assistance PLEASE!!!!

    Alright...looks like I'm headed in right direction, but I don't know what all the numbers mean. I know the first set is the Route and the Trunk and below that is how many I have, but beyond that...I don't know how to read the other numbers? Help please. 001 TIE 00023 00023 0000004...
  12. Godfather8777

    Need Traffic Study Assistance PLEASE!!!!

    I would rather go the "24 hour report" What command do I use to look at that?
  13. Godfather8777

    Need Traffic Study Assistance PLEASE!!!!

    Thank you so much for the reply. This is a remote site that is about 2 hours from my location and the only thing hooked up to it currently is a terminal. Can I just go in every hour and read the reports? I have a pc here that I remote in with and I might be able to caputure through it..not...
  14. Godfather8777

    Need Traffic Study Assistance PLEASE!!!!

    Folks, What I'm looking for sounds simple, but after reading manuals and web forums I still can't figure it out. What I want to do is just do a traffic study on my analog COT's and DIDs. I'm an MSL-100 guy and can't figure this CS1000 out, not just familiar enough with the terminology. Any help...
  15. Godfather8777

    Help on Traffic Measurement

    Folks, What I'm looking for sounds simple, but after reading manuals and web forums I still can't figure it out. What I want to do is just do a traffic study on my analog COT's and DIDs. I'm an MSL-100 guy and can't figure this CS1000 out, not just familiar enough with the terminology. Any...
  16. Godfather8777

    CS1000 Help

    I also got this from another site. SDN-PRS (SOFTWARE DEFINED NETWORK- PRIMARY REFERENCE SOURCE) http://etler.com/docs/AT&T%20Pub/TR41458.pdf
  17. Godfather8777

    CS1000 Help

    It is an 81..I have a 2 dual PRI cards installed in they system now. I do believe only one is active. It holds my two Tie trunks that I have between my PBXs. The other card, I believe in Core 0 is plugged in, but has nothing going to. When you "available network slot" are you talking a...
  18. Godfather8777

    CS1000 Help

    Janaya, Thank you for your response. The SDN-PRS was second hand info through an email I got. I know what ISDN-PRI is and if that is what they meant..they need to get slapped. When you said extra hardware, would I need a digital trunk card or something along those lines for the trunks to...
  19. Godfather8777

    CS1000 Help

    I'm a DMS guy who happens to have to maintain a CS1000 that is over an hour from my site I don't know much about. A vendor is asking if it can accept digital trunks (SDN-PRS) I've never heard of SDN-PRS. Right now all of my DIDs and COTs are analog and I have two PRI's that attach my CS1000...
  20. Godfather8777

    Bad TN's

    Thanks guys...that was quick. I knew you could, I just dont work on this system that much.

Part and Inventory Search

Back
Top