Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. murph51

    Campon Busyout trunk does not signal CO that we are busy

    We have the latest and greatest CM 6.3 softwrae on Dual 8700, ESS totally redundant etc. We were shooting trunk issues on Windstream PRI's connected to a Genband/Genview – C3/8000 switch. We have discovered that when we do a campon buyout trunk tg/mbr that the CO does not see the channel as...
  2. murph51

    Vpn phone to Vpn phone no audio

    We have successfully implemented VPN phones but have an issue adio between 2 of them. The phones work great except when one VPN phone calls another....no audio...call is presented, rings etc but there is not talk path when it is answered. Configuration is CM 4.0, Cisco ASA 5505, 96xx phones...
  3. murph51

    Alternative to VG224's

    We are 60% complete with Nortel to CIsco implementation at a large hospital. As you may know, hospitals are analog intensive. We are now faced with what to do with our 1500+ analog devices. The thought of 50 VG224's or 25 VG248's and the associated electrical, physical space, and HVAC...
  4. murph51

    AES 5.2 Can't Access Webconsole

    same issue here, did you find a solution?
  5. murph51

    9640 IP Phone stuck at Dicover Mode

    CM 3.1.2.639 is the minimum required for this phone to register with he new software.
  6. murph51

    Pesky Client log files

    I'm not sure what yyu are referring to, however, since I posted I found a .xml file on the local machine that writes log files to the Avaya_support directory. In it you can specify a linit to the number of files. I changed it from 100 to 10 so only 10 files get written. I'm not sure what they...
  7. murph51

    Pesky Client log files

    How do I get the MM Exchange client to stop posting log files in the Avaya_support directory of the client PC? This is filling up hard drives.
  8. murph51

    G3R to S8700 FAX over DCS issues

    Had a 3 node DCS connected system. Converted one node to S8700/G650 configuration and rebuilt the DCS connections.Node 1 G3r, Node 2 G3R, Node 3 S8720. Having FAX issues when faxing from G3R to the 8720. Node 1 or 2 to node 3 fails fax. This worked last week before we cut node 3 to 8720. Now we...
  9. murph51

    HELP!!!!! with line side t-1

    OK I tried that as DS1FD and DS1SA. One problem, these are all IP phones. So, I tried abrdg my analog station on the Ip phone, no good, never rings. I tried call forwarding the analog station to the Ip station, no good never rings. I don't think we are recognizing the ringing coming from the...
  10. murph51

    HELP!!!!! with line side t-1

    That will work too, but my real problem is resources.We are installin an 8300/700/IA770 with 5 g 700 and 10 Ds 1 cards. We will be running Avaya Ip wireless phones on this to replace the customers existing 240 Ascom phones. Any config mentioned means one trunk group per phone, the 8300 is...
  11. murph51

    G350 failing to register

    27.27.0 works fine in 3.1 and 4.0. I find that the iproute does not alwys take and I have to enter it manually. Go to MGP CONFIGURE prompt and "set ip rout mgp 0.0.0.0 0.0.0.0 xxx.xxx.xxx.xxx" where xxx is the default gateway address. Yes the multiple 0.0.0.0 works, as a matter of fact it's all...
  12. murph51

    HELP!!!!! with line side t-1

    Thanks, I'll try it. Right now I'm B8ZS ESF with a FX trunk group. That works incoming but I had to build a tie trunk to call back to the Siemens. This works but is a waste of resources. Your solution, if it works, will at least save the return trunks. I'll let you know.
  13. murph51

    HELP!!!!! with line side t-1

    I am trying to tie an 8300/g700 with MM710 to an old siemens switch. They are treating it as an OPX and I have to terminate the call at an assigned IP extension. There is a one to one relationship between each DS1 channel and each extensionto an extension. WHat type trunk group? I can get a call...
  14. murph51

    Setting up a Remote Access number

    Ok the instructions are very good but I am missing something. What is the default username and password for the RAS connection. It is mentioned that it is not the same as the switch, what is it?
  15. murph51

    MM716 not working in G700

    MG firmware must be at least 25.33
  16. murph51

    Adding a G650 to stack

    Power down th entire PN or just the last carrier in it?
  17. murph51

    G350, MM710, Inbounds are not clear.

    Check your codec sets and ip-network-region?
  18. murph51

    Remove "#" from dial string/CSI 8.3

    I'm not sure about 8.3 but in later releases there is an option on some trunk groups, I believe page 2, to suppress the #.
  19. murph51

    Conference call denial event 1760

    Thanks these are set as specified
  20. murph51

    Adding a G650 to stack

    I can find plenty of documentation on installing a new G650 PN. Can't find any on adding a G650 to an existing PN. My question is, since I have to move the existing TDM bus terminator, do I have to power off the entire PN first or can I move the terminator "hot" and connect my new TDM bus cable?

Part and Inventory Search

Back
Top