Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. szuperk

    Coverage Question

    Answering your the initial question, you cannot cover the same call twice. Once it is already covered, it will never follow the coverage of any other object.
  2. szuperk

    VDN ARS ANA Routing

    Exactly. Unfortunately the implications are tremendous: besides the fact a solution cannot be tested internally without preparation, calls arriving on different trunks may select different ARS tables, also there are the internally transferred, covered, forwarded, etc scenarios if you want to be...
  3. szuperk

    VDN ARS ANA Routing

    VDNs will use the ARS/AAR table that matches the caller's location. For incoming trunk callers it is the trunk's location (location of MG for legacy trunks, location assigned to far-end NR in signaling group for IP trunks). In case the trunk has an empty location ARS/AAR table, it will use the...
  4. szuperk

    Call disconnecting - Vector Step Collect 1 digit after announcement

    I would tinker around DSP allocation in the signaling group. Direct IP-IP Audio Connections? n Initial IP-IP Direct Media? n
  5. szuperk

    Call disconnecting - Vector Step Collect 1 digit after announcement

    Try "disp events" Category:vector and vector number in search options. What is the announcement source? GW or AMS?
  6. szuperk

    How to preserve outgoing number going thru VDN->Vector

    According to ACD guide: route-to with coverage=y command behaves like a directly dialed call instead of a VDN call. Therefore the terminating station's display only shows the originating station's display information and does not show the VDN information. Cannot test it now, but worth a try though.
  7. szuperk

    stacking module

    Hi, I think if you type "show module" in switch mode, you can get it. Regards, SzuperK
  8. szuperk

    Definity G3si Built-in Modem

    Hi, you can use the built in modem, only need to attach the 25th port from AUX (if I remember well of its name; it is the first cable coming from the cabinet) to an analog line. Cheers, SzuperK
  9. szuperk

    TN750C and TN2501 question

    Thank you so much WillKoo! Altough I need to use different slot (different cabinet number) because of a MCC1-G650 migration. Sometimes somehow I should try whether it is working with typing in different slot numbers in "change announcements".
  10. szuperk

    TN750C and TN2501 question

    Upgrade to VAL boards should be another project. Now I would like to know what do I need to make the cards work in the new system. Anybody could help?
  11. szuperk

    TN750C and TN2501 question

    Hi all, I would like to use the announcement boards from an old system in a new one, with all the recordings on it. Is it enought to pull out these cards from the old system and put them in the new one? (Should all the announcements show up in "change announcements" field, or I need to import...
  12. szuperk

    New MIB for G700?

    Hi all, Does anybody know why the G700 MIBs disappeared from new releases on support.avaya.com? I would like to monitor VoIP resources, but my SMNP client alerts that the older MIBs are corrupted... Does anybody have a working scenario? Or could someone tell me the OID range of G700 voip...
  13. szuperk

    UID investigation

    Hi Guys, Many of the denial events refer in Event Data 1 to the UID, which as I know is a specific number for each entity in the system. My question is how could I interpret these for better maintenance? Any suggestion is greatly appreciated. Cheers, SzuperK
  14. szuperk

    Advise on The Avaya ACS required...

    Hi, could you send it to me also? It would help me so much. szuperkaroly at gmail dot com Thanks a lot
  15. szuperk

    1761: Transfer COR restrict

    Hi all, I have the following denial event when trying to transfer outside the PBX: 1761 Transfer COR restrict Evt. Data 1: 5DDE Evt. Data 2: 10 Could anybody help what could cause the problem? The trunk COR setting is allowed for calling. What do the event data fields mean? Thanks in...
  16. szuperk

    INADS calling ATTD

    Hi group, I have a problem that INADS ext is calling somewhy the attendant. Could you please help me to solve this problem? (Where to set a different number, or disable it) Thanks and best regards, SzuperK
  17. szuperk

    SMDR-station to station recording

    Hi, on "change system-parameters cdr" form enable option "intra-switch CDR", then after entering "change intra-switch-cdr" you can fill the extension you wish to appear in the accounting system. regards, SzuperK
  18. szuperk

    force LSP to re-register

    Thanks a lot guys, I tried a reset sys 2 and it was enough. Anybody has a documentation about a detailed reset levels? (what kind of services effected, etc.)
  19. szuperk

    force LSP to re-register

    Hi all! Anybody has a procedure to force the G700 LSP to re-register after a broken link to the main site? (main site is G700 S8300 also) Best regards, SzuperK
  20. szuperk

    MWI for another users mailbox

    Hi all, Have no system to test it, but I would like to configure phone sets to see whether a message arrives to a particular mailbox. Is there a way to accomplish this? Thanks in advance, SzuperK

Part and Inventory Search

Back
Top