Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. msuiter

    One-X Portal With POTS Lines isn't working

    I haven't been able to get it working, I have everything in place as far as I can tell, working ARS table, trunk to trunk connection enabled, power user, preferred edition, vm pro working, one-x portal fully working, one-x mobile app connects, etc, it just won't make any calls because of the...
  2. msuiter

    One-X Portal With POTS Lines isn't working

    You are absolutely right. I could have sworn I had it working on POTS lines before, but I guess my memory is faulty. Fantastic!
  3. msuiter

    One-X Portal With POTS Lines isn't working

    Yep, one of the first things I did as soon as I saw it wasn't working. I have even made sure to remove the "Inhibit off-switch forward/transfer" checkbox under System>Telephony
  4. msuiter

    One-X Portal With POTS Lines isn't working

    The No Channel 34 thing does have me slightly confused. No idea what it means. But they all have line ID 1 for both incoming and outgoing group IDs.
  5. msuiter

    One-X Portal With POTS Lines isn't working

    I am trying to set up One-X Mobile with an IP500V2 on 11.0.4.2 and any calls using the app to call me back on my mobile phone do not go through. I attempt the call, and the app says "Calling XXXXXXXXXX from mobile phone". System Status shows 2 calls "Trunk for telecommuter" stuck on ARS Main...
  6. msuiter

    H249 on IP Office

    thread940-1792508 I know some people wanted to know the results, forgot to post them. I used FusionPBX (an open source multitenant PBX with built in phone provisioning) and one of its fanvil provisioning templates to program the H249 phones. The IP Office passed out a common config file that...
  7. msuiter

    H249 on IP Office

    I have not delved into it yet, but the fact that they are Fanvil phones has me fairly confident I can because on configuration examples I have found. I am getting ready to build a template for these phones and then import the MAC addresses of 400 phones into our hosted phone provisioning server...
  8. msuiter

    H249 on IP Office

    I need to configure a large number of H249 phones with IP Office. At the moment, I can't figure out a way to do automatic configuration with button programming or any other features through the IP Office and the H249 phones, I can only find a way to configure the phones via their Web UI. I am...
  9. msuiter

    Transferable dial out privilege

    http://marketingtools.avaya.com/knowledgebase/businesspartner/ipoffice/mergedProjects/feature_description/_frame2.html?Transferable_dial_out_privilege.html?zoom_highlight=Transferable+dial+out+privilege Transferable dial out privilege Administrators and supervisors can grant outside line access...
  10. msuiter

    BCM50 Was working with 6 phones, but only 4 licensed

    It shows 4 digital station licenses BCM50 2 Int Analog Trunk Auth : BCM50 4 Int Digital Stn Auth : BCM50 Voice Messaging - 4 seat : Yet somehow 6 digital stations were working just fine before we touched this system. And yes, the sets do say Keycode Required when you pick up the handset.
  11. msuiter

    BCM50 Was working with 6 phones, but only 4 licensed

    We have a BCM50 that was working with 6 phones, we ended up adding a phone and didn't even think to check the licenses (units of 4, must be licensed for at least 8... we assumed). The system now has 7 phones and suddenly only 4 will work and we checked the licenses in KRS and it is only showing...
  12. msuiter

    New IPO500 install, v9.1, default Admin password login fails

    The Password on an IPO is stored internally, not in the config. If you are unable to access it then you will likely need to do a security reset through the Serial port on the back. http://pbxbook.com/ipoffice/rstpassw.html Then the default credentials should work.
  13. msuiter

    Certificates for IP Office and Application Server

    During the process I discovered the difference between the 2 pages. I have it fully working putting it in the correct page, but only after installing a fresh Application Server. As far as the 7071 Settings>General>Certificates section, what do I need to do to use this to distribute a 3rd party...
  14. msuiter

    Certificates for IP Office and Application Server

    Right, that is the problem, when I try to import it it only applies to the Platform View (WebControl) not the We Manager (still uses an old certificate that I manually added last year), or the One-X Portal (uses a generic One-X Portal generated certificate. Mid-way through writing this post, I...
  15. msuiter

    Certificates for IP Office and Application Server

    I have an IP Office 500 V2 on 9.1.6 and the Application Server running vmpro and onexportal. I have been down several roads trying to get a fully valid certificate installed across the solution. I have a wildcard certificate and the private key that I can manipulate into whatever format that I...

Part and Inventory Search

Back
Top