Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. Omenas

    OS4K V10R1. DeskPhone CP600 HFA function key name

    Hello, Desk Phone CP600 HFA with additional keys module and OS4K V10R1. Is it possible to give custom names to the functional keys configured in the additional keys module? Of particular interest is the name of the "Transfer" button, as its display name is now just a jumble of letters.
  2. Omenas

    OS4K V10R1 Call logging

    If the same CDR principle remains in the new versions, then it is clear....I'll just have to remember. We have Duplex and Atlantic LAN. We don't have the old software anymore, and the license was a physical dongle in the LPT port, which is why we are interested in what you use nowadays to...
  3. Omenas

    OS4K V10R1 Call logging

    Previously, when we had hardware Siemens Hicom/HiPath 300/4000 PBXs, we used CDR over Atlantic LAN and PhoneEX (if I'm not mistaken) software for call recording and analysis. We are now running OS4K V10R1 in a virtual environment and stacking call queues using COL. This method is not convenient...
  4. Omenas

    Desk Phone IP55G HFA problems with Canonical dial and LDAP

    The point is that I don't know exactly when it stopped working, because in the beginning there was OS4K V8 hardware version, then it was migrated to V10 version in VMware environment, and now the version has been upgraded to V10R1. IP55G is only used by some remote users and I haven't seen...
  5. Omenas

    Desk Phone IP55G HFA problems with Canonical dial and LDAP

    Hi, Back when we had OS4K V8, we started using Desk Phone IP55G HFA. Subscriber numbers were recorded in the internal number format (9XXXX) in Active Directory contacts. LDAP worked fine. CP series phones followed and only about 100 units of the IP55G remained. Also, the PBX version is upgraded...
  6. Omenas

    OS4K and CP series phones. Need help with contact avatars via LDAP

    I'm not an AD expert and maybe someone can help. System OS4K V10R1. Phones CP600 HFA. DLS is also used. Phone number address book using LDAP from AD contact list. There is a desire to show the caller's photo. Maybe you know how to set the AD and LDAP template in phones so that next to the...
  7. Omenas

    OS4K V10R1 problems with Softgate

    I also thought that I should try to increase the reservation value. I will have to ask the DC admins to increase the reservation for at least one Softgate. As soon as I noticed this problem, I immediately installed all the latest Hotfixes. We don't have direct access to Unify, but I have been...
  8. Omenas

    OS4K V10R1 problems with Softgate

    Softgate server CPU is 2.6GHz. The virtual machine is set to 4 vCPUs and the CPU reservation is set to 11000 MHz. Compliant, but errors occur every hour.
  9. Omenas

    OS4K V10R1 problems with Softgate

    OS4K V10R1 in an ESXi environment. Payload encryption is enabled for all HFA subscribers. Two problems have accumulated: 1. After updating OS4K from V10 to V10R1 exactly every one hour for all Standard and Survivable softages throws the following error: F5749 E8 N3741 NO ACT BPA BOARD LW...
  10. Omenas

    Recurring error F5749 for all Softgate

    What could be the cause of this problem? OS4K V10R1.42 Separated Duplex in a virtual environment. All Standard and Survivable Softgates throw this error at the same time every hour. The CPU is set to 8GHz. F5749 E8 N0318 NO ACT BPA BOARD LW REQUEST 23-12-18 07:22:05...
  11. Omenas

    The most correct way to migrate Quorum node to Softgate?

    Thanks for the help and advice. Last week we reinstalled the Quorum VM from the RISO image and updated OS4K to V10R1.42. The first reaction is that opening OpenWebStart not in the same browser but in a new window is a step backwards.
  12. Omenas

    The most correct way to migrate Quorum node to Softgate?

    Is Quorum with Softgate necessary for the new V10R1 version? The rep says I don't need Softgate, I just need a bigger VM size for Quorum.
  13. Omenas

    The most correct way to migrate Quorum node to Softgate?

    Will be like regular Quorum, although installed on a VM built on Quorum with Softgate OVF? And then if you install using the current Quorum firstinstall.xml file?
  14. Omenas

    The most correct way to migrate Quorum node to Softgate?

    The following sequence of actions was devised: 1. create the image of Quorum RISO 2. Shutdown Standby node 3. Switch active node to standalone mode 4. Shutdown Quorum node 5. Create a new VM with Quorum standard softgate OVF. 6. Install Quorum from the RISO image 7.Start Quorum and deactivate...
  15. Omenas

    The most correct way to migrate Quorum node to Softgate?

    Regarding the licenses, I know everything, I just said CODEW, as an old code name :) The point is that we have large networks and large data centers where OS4K is installed, which means that it is necessary to employ more than one colleague in my question to change the network settings of the...
  16. Omenas

    The most correct way to migrate Quorum node to Softgate?

    Trying to install a whole new system seems very complicated to me (maybe I'm wrong), because then I have questions about IP addresses, Softgates, Branches, Survivable Softage, CODEW..... There is one idea, but I have never tried it yet... and if I make a Quorum RISO, I turn off the quorum and...
  17. Omenas

    The most correct way to migrate Quorum node to Softgate?

    Hello, We have OS4K V10R0 Separated Duplex installed on virtual machines. We are preparing to upgrade the system to version V10R1. Quorum node is currently installed by default in a virtual machine, but Quorum must be installed as a Softgate VM before upgrading. What would be the best way to...
  18. Omenas

    OpenScape 4000 V10 Duplex restart during VM back up

    The admins explained to me that the backup is done after creating a VM snapshot, transferring it to the backup server and then deleting the snapshot. Comparing the times, we can see that the PBX starts throwing errors when the VM snapshot is started.
  19. Omenas

    OpenScape 4000 V10 Duplex restart during VM back up

    I think so too, but how could it be solved? Why does the PBX not switch to another node when backing up one VM? so if one node of the station breaks down, the pbx has to work with another node. Maybe our system administrators could fix the servers, but for now it is not clear what.
  20. Omenas

    OpenScape 4000 V10 Duplex restart during VM back up

    OpenScape 4000 V10 Duplex in a VMware environment. Automatic backups of all VMs are made in the data center every day. When a VM backup of an OS4K node is started, the PBX performs both a soft and a hard restart. What could be done to avoid PBX restart and connection loss? F6616 M4 N8621 NO ACT...

Part and Inventory Search

Back
Top