Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. bitapn

    Hi all. I have a Openscape 4000 v7

    Hi all. I have a Openscape 4000 v7.I want to deploy a scenario in which when a station goes off-hook ,then 10 stations starts ringing.so i made a hunt group and grouped those stations.then i set a hotline for the access code of that hunt group but it is not working. stations 4200 and 4201 and...
  2. bitapn

    voice recorder in Hipath 4000

    Hi everyone. I have a Hipath 4000 v7.could you please guide me how I can record all calls? Thanks
  3. bitapn

    DSS on key module

    Hi all. We face a problem in one of the project that a hipath 4000 ver. 4 have been located in . the problem is we can not add analog telephones as DSS keys on key modules . we can add them as Name keys on key modules.we can also add digital phones as DSS keys on key modules.we can also add...
  4. bitapn

    trunk to trunk

    yes. I use the close numbering plan .can you guide me for programing the LCR? do I need any other configuration?
  5. bitapn

    trunk to trunk

    Hi all. I have Aa opebscape business x8 and a openscape business x5 which are networked together via ip trunk. X8 is the master node and X5 is the slave one.they are working fine. how can the stations of X5 have access to Co trunk of X8 and vice versa ?how can i set the configuration so that the...
  6. bitapn

    problem in defining COSXD

    Hi, I have a openscape 4000 v7. I want to define a COSXD for my desk phone by using the command below as i used to do in previous versions of hipath 4000. ADD-PERSI:STN,4003,"Ahmad",,,"12345",,,,,,,,,,,,YES,; but I am faced with the error: F23: COSXCD IS BLOCKED and here is the...
  7. bitapn

    trace of hipath4000

    many thanks for your reply. I really need it.would you please provide me with the step by step procedure because i am new ti Hipath 4000?
  8. bitapn

    sip phone in x5

    hi. i have a osbiz x5.i have problem in using soft phones.when the delay in the network increases,the voice does not transmitted.i used to have a hipath 3550 v9 in the same network with the same QOS and everything was fine.would any one guide me what is different in osbiz that causes this and...
  9. bitapn

    transfer to trunk

    could you bring an example? i do not know the details exactly.
  10. bitapn

    class of service change over code

    DIS-FEASU; H500: AMO FEASU STARTED ACTIVATED FEATURES SPDC SPDI HTVCE HTFAX HTDTE OVR FRKN NIGHT COSXCD COSXKEY DCOSX COSXATND COSXT COSXDP ICPTDID HOTRCL DND VARCONF SNR RKNOVR...
  11. bitapn

    transfer to trunk

    hi. i have a openscape 4000 v7.i can not transfer the calls to a trunk.these are the trunks configurations: ADD-TDCSU:NEW,1-01-014-0,10,10,0,0,100,1,1,"PRI...
  12. bitapn

    class of service change over code

    ...i receive the error: F23: COSXCD IS BLOCKED and this is the configuration: ADD-PERSI:TYPE=STN,STNO=1001,NAME="Telecommunication Support*",COSXCD="45678",PININDIV=YES; ADD-SBCSU:1001,OPTI,IP2,1-1-1-1,OPTIIP,1,1,2,1,2,1,1,0,0,N,0,0,,,N,0,0,N,,,Y,0,N...
  13. bitapn

    DTMF dialing

    thanks sbcsu, no it is a sip extension.the voic email is connected by a SIP extension.
  14. bitapn

    DTMF dialing

    hi all. i have a hipath 4000 v6 and i have an additional voice mail system.the problem is when i am not able to dial a number after a connection is established by HFA stations.there is no problem when i use analog or sip phones but when i use a HFA phone ,after dialing the voice mail number,i...
  15. bitapn

    auto attendant issue

    I upgraded the system but there was no change.the problem still exists.
  16. bitapn

    auto attendant issue

    would you please tell me in which branch of unify partner portal I can fin the pilot? I found one in communication system/openscape business/openscape business x1,x5,x8 but it is about 2 MB and I guess it is not the one you mean.
  17. bitapn

    transfer to trunk

    Hi. I have a openscape 4000 v7 and i have problem in transfer my calls toPRI trunk.na calls are transfered to trunks or no stations are forwarded to trunks.these are the TDCSU and related COSconfiguration. ADD-TDCSU:NEW,1-01-014-0,10,10,0,0,100,1,1,"PRI...
  18. bitapn

    auto attendant issue

    thanks. would you please tell me how i can upgrade my system to this pilot?I mean how i should install it on my device?
  19. bitapn

    auto attendant issue

    Hi, We have one Unify x5 and one Unify x8 that are connected together in a network. and we intended to set Auto attendant on both of them. We have got the auto attendant license for both. unify x8 auto attendant has been configured and is working properly whereas Unify x5 has been configured...
  20. bitapn

    H323 trunk in openscape 4000

    Hi all. i have a openscape 4000 ver 7. i need to connect it to another PBX by using a IP trunk via H323. I need to know the commands for configuring the H323 trunk in openscape 4000. could you please help me and make me aware of the trunk details which i need to set in TDCSU and LWPAR or any AMO...

Part and Inventory Search

Back
Top