Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Search results for query: *
- Users: hsh2hsh
- Order by date
-
microsoft equation 3.0
Anyone knows how to download Microsoft Equation 3.0? Help me,please! Simon Yu CCNP- hsh2hsh
- Post #2
- Forum: Microsoft: Windows
-
Going to end of file
The ENDFILE command is used to mark the current position as end of file. Endfile(unit=number, err=errorlabel, iostat=iostat) Simon Yu CCNP -
what kind of router should I use?
cisco 2500 series will be a good choice, I think :) -
Cisco 1601 Router
FYI: Console Terminal Baud Rate Settings Baud Bit 5 Bit 12 Bit 11 115200 1 1 1 57600 1 1 0 38400 1 0 1 19200 1 0 0 9600 0 0 0 4800 0 0 1 2400 0 1 1 1200 0 1 0 For more info,please... -
Line Protocol Down
Line protocol is {up | down} Indicates whether the software processes that handle the line protocol believe that the interface is usable (that is, whether keepalives are successful). Do you apply Frame Relay? If the serial interface is up and the line protocol is down, either the local loop... -
Cisco 1601 Router
I have ever such a problem: After I turn off my router for more than half an hour and reboot, it will not work(even the power ok led turn to down). But it will auto load after 2 days or more with the power switch on. I doubt if there is a rechargable battery in the power unit and the unit will... -
website not viewable inside the network
Agree with BuckWeek. If the site is located in different side, ACL will probably the reason. Please give us the topology. Simon Yu CCNP -
ACCESS-LIST MAC Help
I know only that there is a "mac access-group" command can be used in a Catalyst Switch. :) Simon Yu CCNP -
IOS Advice
Please visit here: http://www.cisco.com/en/US/products/sw/iosswrel/products_ios_cisco_ios_software_releases.html Simon Yu CCNP -
setting up VLANs on Cat 2950
Switch# vlan database Switch(vlan)# vlan vlan-num name vlan-name Switch(vlan)# exit Switch# configure terminal Switch(config)# interface interface module/number Switch(config-if)# switchport mode access Switch(config-if)# switchport access vlan vlan-num Switch(config-if)# end Simon Yu CCNP -
Failover link with 2 different ISP´s
Hi,allanpoto If you change the sentence " ip route 200.0.0.0 255.255.255.128 FastEthernet0/1" to " ip route 0.0.0.0 0.0.0.0 FastEthernet0/1 250 " I think it will work. ---------------------------------------- It is a waste of money to hire a leased line of 512k just... -
827 ADSL Router WAN Interface Configuration
Any interesting traffic defined? .... dailer-group 3 ... dialer-list 3 protocol ip permit Simon Yu CCNP -
how to restore a captured text file on cisco 2600 series routers
You can: copy run tftp:filename.cfg //keep your running-config then, after you edit the filename.cfg copy tftp:filename.cfg run //write back ... Simon Yu CCNP -
Failover link with 2 different ISP´s
Sorry, I don't understand what you print very much. But I think the floating route works fine,since "after 5 days the link stop". What is in your route table when you disconnect the primary link ? Is the floating route appear? Do you apply NAT? Do you set any pessive-interface? Is... -
Weird cisco config maker message
Please show us ur NAT configuration. Simon Yu CCNP -
backing up the running-config over the terminal port
Butler do not have enable right or RW community string, I think. :) Simon Yu CCNP -
Failover link with 2 different ISP´s
Won't the floating route work? I don't believe it. Perhaps you didn't add any DNS server entry related to the second ISP enviroment. Simon Yu CCNP -
Static route with different priority
You can use administrative distance. Simon Yu CCNP -
-
