Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. Tuxedopenguin

    MD110 NIU not responding

    The crossover doesn't give me a link status, well to be honest I am not sure if it is a currently cross over or not, because its a wall box to RJ45 lead, so I rewired the wallbox to the opposite of what it currently is. Which makes the lead to the switch a cross over lead. I don't know if the...
  2. Tuxedopenguin

    MD110 NIU not responding

    CADAP; CALENDAR DATA IDENTITY=43-0200-3 VERSION=CXP1010043/5/BC11SP14/R4C 11:34:21 WED 17 JAN 2007 END
  3. Tuxedopenguin

    MD110 NIU not responding

    Will try this in the morning, you didn't say if the info I sent through was good bad or lacking. Are you by any chance waiting for the results of the crossover test before you comment. Just curious because I am still unsure of the results from IODDP, why doesn't NET and NET2 report IN SERVICE?
  4. Tuxedopenguin

    MD110 NIU not responding

    I can't answer because the cable is connected to the NIU through a fancy block type connector, and on the other end there is an RJ45 crimped to it. This goes directly into the Switch.
  5. Tuxedopenguin

    MD110 NIU not responding

    Here are the details you asked for... IODDP; I/O DEVICE DATA NODE IODEV/SUBFS BPOS/EQU I/O-BUS TYPE/USAGE STATUS AUTH SYSN - 001-0-60 - - IN SERVICE SYSN SYSDISK1 001-0-60-0 SCSI/3 ADTX IN...
  6. Tuxedopenguin

    MD110 NIU not responding

    Hi, It took about so long to get our network admins to answer the call I logged but there is good news, I have had the port configured, accordingly, but it does not work. Actually it still does the same. I have a stack of info to send through but the problem is I had to take screen shots to...
  7. Tuxedopenguin

    MD110 NIU not responding

    I have tested by plugging the MD110 and the server into a decated isolated switch, the same problem occurs, I don't think this is a network related issue. even if I just connect the MD110 by itself to the switch I get a link status (Link LED is on) but no activity (Activity LED off)
  8. Tuxedopenguin

    MD110 NIU not responding

    Thank you for all the input guys, I have managed to restart the NIU, however I get a short burst of between one and three ping replies. Having a good solid networking background I assume there is a service/setting which is conflicting causing the NIU not to work. Does any one know what I can...
  9. Tuxedopenguin

    MD110 NIU not responding

    Thanks for the reply, It does not work for the the following reason: <RFBOI:BPOS=...; RFBOI:BPOS...; SURE? (YES/NO) <YES; NOT ACCEPTED FORMAT ERROR < Is there another way or a problem with the command?
  10. Tuxedopenguin

    MD110 NIU not responding

    Is there away using MDSuport or EMg tty console to reset the NIU?
  11. Tuxedopenguin

    General Information

    The Log has only logged the commands as I typed them, none of the output has been recorded. I will play around a bit and get back to you on this one.
  12. Tuxedopenguin

    Transfering current DNA 5.1 Server to a New PC hardware

    Thanks for that note, I resolved the loss of all my analog extensions. They are back now that I have switched the node back to BC11. Thanks that very usefull info.
  13. Tuxedopenguin

    General Information

    How do I get the TTY output in a text file? I don't seem to be able to find it in the latest log files!
  14. Tuxedopenguin

    General Information

    Nope, (I am not sure I understand you) heres what we have: we have a modem on the server and another connected to the IPU and we remote over the extentions to connect....? :(
  15. Tuxedopenguin

    Transfering current DNA 5.1 Server to a New PC hardware

    Output of CADAP IDENTITY=43-0200-3 VERSION=CXP1010043/BC11SP14/R4C 21:44:05 THU 11 JAN 2007 END < There must be some corruption here of some sort because in the extention manager there is reference to BC12, I will quickly see if I can find where I saw that and get back to you.
  16. Tuxedopenguin

    General Information

    Sorry there is a typo about, we can't connect usiing the NIU, We are dialing in via remote connection. I am also not familiar with the IPU and don't really knwo how to set it up using the modem!?
  17. Tuxedopenguin

    Transfering current DNA 5.1 Server to a New PC hardware

    Is there a newer version of DNA? Excuse me if this is a bit out of context. I started with this unit two days ago...
  18. Tuxedopenguin

    General Information

    Thanks for the response, I have the install files on the server, The version on the server is DNA 5.1 SP1. We are only using EMG and MD110 Support with the default progs like user manager etc.. Our server is setup with the Desktop version of SQL included on the DNA 5.1 Media. To throw a...
  19. Tuxedopenguin

    Transfering current DNA 5.1 Server to a New PC hardware

    Greetings, I am not sure I fully understand the DNA 5.1 technical Guide with regard to this topic. So I hope someone here can describe this a bit better. Under the Heading: Transferring D.N.A. from one computer to another Since I will use the existing media which was used last time the server...
  20. Tuxedopenguin

    General Information

    I see what you mean, the server is is an especially old peace of P2 hardware, and as a result of certain near death experiences for it, it has been formatted and redone accordingly overtime. I have no idea how the previous chaps did this, what I do know is that I now have a new P4 machine which...

Part and Inventory Search

Back
Top