Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. phoneman1981

    Call Pilot 100 Feature 983 invalid password.

    Thanks to exsmogger for the advice. I was able to access the CP from the Teleset. Thanks again.
  2. phoneman1981

    Call Pilot 100 Feature 983 invalid password.

    Heading back to the site in a few minutes. Anxious to try again. Thanks so much for your help. I will keep you posted. Thanks again.
  3. phoneman1981

    Call Pilot 100 Feature 983 invalid password.

    I will try it again later this morning. From the browser I think I am entering 120000? So I might try 12120000. I never thought to try that. Thanks
  4. phoneman1981

    Call Pilot 100 Feature 983 invalid password.

    Hello: Thanks for your reply. Considering the CIC is 2 digit intercom. The passcode should in fact be 120000. I have also tried 1020000. But neither of them works? I could still use some help. Thanks...
  5. phoneman1981

    Call Pilot 100 Feature 983 invalid password.

    Hello: I CAN connect to a CP100 with my laptop. Password is the standard default passcode for a 2 digit CICS. It works fine. However when I try to log in from a T7316e using feature 983 the same passcode says invalid? Any suggestions? Thanks.
  6. phoneman1981

    Customer Created Cics Issue?

    Hello: Thanks for your hints and ideas. I will check your suggested ideas and report back. Thanks again.
  7. phoneman1981

    Customer Created Cics Issue?

    Good Morning: Wierd issue. Called to a site by one of our other techs yesterday for an outage. One of our Clec customers purchased a new cordless themselves to replace his existing Nortel T7406 cordless that evidently failed on his Nortel CICS. The new cordless handset looks similar to the...
  8. phoneman1981

    Upgrade for MICS. Caller ID & T Series sets.

    Another vendor that has since went out of business installed a MICS for a customer many years ago. The customer is asking me to take over the maintence for the system. They would like to add caller ID and upgrade the sets from M7310 to T7316 or T7316e sets. Below is the current configuration...
  9. phoneman1981

    CICS Randomly changes time.

    Thank you to everyone that replied to this thread. You were absolutely correct. The time and date in the local providers Adtran T924 was not set correct. And the time and date in the Nortel ksu was set for auto time and date. Still learning after all these years. Thanks again.
  10. phoneman1981

    CICS Randomly changes time.

    Hello: Thanks for the hints. Where do I check in the CICS programming to see if the time and date are set by the caller ID info. Thanks in advance.
  11. phoneman1981

    CICS Randomly changes time.

    Hello: I recently installed a used CICS as a temporary band aid to get a customer by until new equipment can be installed. The used system is working just fine. All 8 caller ID lines work. I set the time and date to the correct time and date yesterday, but noticed the time was off by several...
  12. phoneman1981

    One way dialing issue on two Samsung Systems.

    Hello: CatOnkeyboard. Thanks for the suggestion. I never heard anymore about this from my customer, I assume they must have found something at the main site as you suggested. Thanks again.
  13. phoneman1981

    One way dialing issue on two Samsung Systems.

    Hello: I work for a CLEC that provides copper trunks and internet connection to a local customer here. They have a small 2 year old Samsung key system connected back to the home office via a static IP over the internet. 3 digit dialing between sites did work at one time. Having one way dialing...
  14. phoneman1981

    Expanding a MICS KSU

    Hello Again: Just wanted to let you know that the expansion went very smoothly. Thanks again for the advice.
  15. phoneman1981

    Expanding a MICS KSU

    Thank you to the both of you. I have installed hundreds of Toshiba Systems and about 70 Nortel Systems 3X8, 616, CICS, MICS and a few BCM50's in my career. None of which were very complicated applications or have required much maintenence since the day they were installed, so I have little...
  16. phoneman1981

    Expanding a MICS KSU

    One of my now retired coworkers installed a MICS for a customer in 2002. DR5 software SP:30BKG02 NAT. The system has been bullet proof for over 10 years. However the customer has now out grown the original KSU configuration of 8 caller ID lines, 32 digital extentions (T7316 and T7208 series...
  17. phoneman1981

    Flash Voicemail problem

    Hello: I want to thank each one of you for your help. I had already tried to reboot the VM with no good results. The F903 did not work. So I did a F983 config and rebuilt the mailboxes and AA. I do not work on Nortel equipment as much as I used to, I am a little rusty. Your suggestions saved me...
  18. phoneman1981

    Flash Voicemail problem

    Hello: I am trying to help a customer with an outage on a Flash VM connected to a 616 cabinet. It has been working good for many years. But just recently quit answering calls? The voicemail is not completely dead. Power light on Flash is good. You can do a F985. You can attempt to open a...

Part and Inventory Search

Back
Top