Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
Etherchannel on 3745 chassis interfaces
Hi all, thanks for your suggestions: the source of the problem may be that there isn't a second interface in the channel. However, the other router/switch link, on Fa0/0 is currently in production, and I can't disable it just to see if that works. Besides, the Catalyst seems to be fine having... -
Etherchannel on 3745 chassis interfaces
OK, here's the relevant config c3745, IOS 12.3(12) Fa 0/0 and 0/1 are chassis interfaces: [...] ! interface Port-channel2 no ip address full-duplex no cdp enable ! interface Port-channel2.103 encapsulation dot1Q 15 native ip address 192.168.103.249 255.255.255.0 no snmp trap... -
Etherchannel on 3745 chassis interfaces
Hi, I'm currently trying to enable etherchannel on the built-in FastEthernet interfaces. The router is a c3745, running IOS 12.3, connected to a 3550 catalyst. Everything seems to run fine, a sh int port-channel 2 shows the link is up on both sides, but there is no way to ping between the 2...
