Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. ultramonkey

    Routing issue

    the only other NAT config is just the access-list (at the moment this is any to keep the issue simple)
  2. ultramonkey

    Routing issue

    Hi, I am trying to link 2 cisco boxes one which is my gateway with the second thats my isp. I have configured as below and attached my laptop to the lan with an ip of 192.168.69.22. From the router I can ping the internet, but from the LAN I can only ping my f0/0 and not the router beyond...
  3. ultramonkey

    Outlook Web Access + ACL's and NAT

    Hi, I am having an issue trying to allow OWA access to the Server on our Network, I have added the NAT routes and ACL's to allow it and OWA is working internally. Any help would be greatly appreciated! ip http server ip http authentication local ip http secure-server ip http timeout-policy idle...
  4. ultramonkey

    ACL + SMTP + HELP!

    Thanks again but this still hasnt helped, I made the changes but no change!!!
  5. ultramonkey

    ACL + SMTP + HELP!

    Building configuration... Current configuration : 6129 bytes ! version 12.3 no service pad service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec localtime show-timezone service timestamps log datetime msec localtime show-timezone service password-encryption...
  6. ultramonkey

    ACL + SMTP + HELP!

    Further to the above, when I apply the firewall the below is added to the running config - access-list 101 remark auto generated by SDM firewall configuration access-list 101 remark SDM_ACL Category=1 access-list 101 permit udp host 194.72.0.98 eq domain host 217.45.194.201 access-list 101...
  7. ultramonkey

    ACL + SMTP + HELP!

    Thanks for that, I have started from scratch and added the port forward statement. This works fine until I add the Firewall using the SDM. For some reason that I cant work out this kills the smtp??!! The config is pretty much as per above, any ideas??? Thanks
  8. ultramonkey

    ACL + SMTP + HELP!

    Hi, I am having an issue with forwarding and allowing SMTP traffic, I have added a NAT to the Internal Mail server and allowed inbound TCP traffic on port 25. But still no joy, can someone please advise where I'm going wrong? ip classless ip route 0.0.0.0 0.0.0.0 Dialer0 ! ip http server ip...

Part and Inventory Search

Back
Top