Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
-
Cisco 1720 router config problem
Chris, Thanks for your input. However the thing I don't understand is the second static nat entry works, but the first one does not. The one routed to the 199.1.1.2 will not work. I don't really understand that much, matter of fact I see it entered and getting stats in the 'show ip nat trans'... -
Cisco 1720 router config problem
OK I have figured out my problem, the problem was I was missing the - bridge 1 route ip - on my bridge group. Now my issue is that NAT is not properly working on my 2 public IPs 67.39.104.218 and 219 I am so sick off this router config, I know it must be something really stupid. But I can't... -
Cisco 1720 router config problem
OK. I figured out why I couldn't get to my ser0. I changed the IP route command from Serial0 to the 66.73.26.33 add so now the IP route command looks like this ip route 0.0.0.0 0.0.0.0 66.73.26.33, I guess it wasn't liking the Serial0 Now my problem is I can ping from the outside world but... -
Cisco 1720 router config problem
Thanks to both you for your help, but IllegalOp you are correct it is 67.39.104.216/29 network block 67.39.104.217 Router 18-22 useables I know this is something that I am missing but I can't seem to put my finger on it. I have removed all access-list entries and still have the same problem I... -
Cisco 1720 router config problem
Here are the results of the status of the frame: show frame map Serial0 (up): ip 66.73.26.33 dlci 665(0x299,0xA490), dynamic, broadcast, IETF, BW = 1535000, status defined, active RTCleve#show frame lmi LMI Statistics for interface Serial0 (Frame Relay DTE) LMI TYPE... -
Cisco 1720 router config problem
Yes those pings shown at the bottom of the config file are from the router. If I added the 67.39.104.217 to the fastethernet then it would ping? And do I really need to ping that IP, SBC was telling to test that and if I couldn't something was wrong. I still feel like something is wrong in the... -
Cisco 1720 router config problem
I have a problem with a router config on a 1720. We recently changed T1 service and since I cannot get the configuration to work correctly. I can ping the gateway IP to the ISP but not my own serial IP. IP information Router IP : 67.39.104.217 Subnet Mask: 255.255.255.248/29 Gateway IP to...
