Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. TELECOSYSTEMS

    Sl1100 IP extension problem

    Installed a Ip extension on a SL1100, programmed the phone at the remote site, sip settings, NAT trans,dynamic,WAN ip of the router at the KSU side and the phone comes up fine. After 2 1/2 minutes the phone resets and displays server connection lost. After it reconnects works fine again for 2...
  2. TELECOSYSTEMS

    IPO Voicemail

    I got to the command line [root@uc-module~]#.If I type cd/it says -bash: cd/:no such file or directory. Not having any luck
  3. TELECOSYSTEMS

    IPO Voicemail

    Just downloaded Putty on a flash drive will load it on site Monday and follow your posts. Wish me luck, as I'm not that proficient at what your instructing me to do. Are there any precautions I should consider before I venture into this lynix world?
  4. TELECOSYSTEMS

    IPO Voicemail

    You need to be in as root on the UC module, putty in – get to admin menu and then “root” command. Can you explain how to accomplish this statement. Thanks copy and paste.
  5. TELECOSYSTEMS

    IPO Voicemail

    I have a UCM 8.1 lite/Pro and I can't leave a message in any subscribers MB. Response states users MB is full. I've cleared old, saved, and new messages and nothing has changed. Cleared a couple of MB's thru VM pro and when trying to rerecord users name response is voice file system is out of...
  6. TELECOSYSTEMS

    IPO Voicemail

    Thanks aaron. Running Linux worked just as you stated. Appreciate all the help.
  7. TELECOSYSTEMS

    IPO Voicemail

    Isn't the voicemail running only on the module in the IPO?
  8. TELECOSYSTEMS

    IPO Voicemail

    So how do I set the time on the server it's running on.
  9. TELECOSYSTEMS

    IPO Voicemail

    Pro
  10. TELECOSYSTEMS

    IPO Voicemail

    That's what I did. Read previous post.
  11. TELECOSYSTEMS

    IPO Voicemail

    I set the IPO time server to be the local pc running manager. Closed manager and scheduled a reboot for 1 AM. VM time is still off. Where do I find the server my vm is running on?
  12. TELECOSYSTEMS

    IPO Voicemail

    My IPO voicemail is 2 hours behind the IPO time. What is the best way to sync the time & what is the preferred time server? Thanks
  13. TELECOSYSTEMS

    PRI question

    I'll start with my PRI provider and let you know. Thanks
  14. TELECOSYSTEMS

    PRI question

    Channels 10,11 & 12 are not being accessed by the system. It's like they are not there,anymore. The system has been in for 10 months. All 12 channels have been active until recently. If you need to know about licences I'll need to get back to you. As far as diagnostics I haven't done any, what...
  15. TELECOSYSTEMS

    PRI question

    Channels 10,11 & 12 are not being accessed by the system. It's like they are not there.
  16. TELECOSYSTEMS

    PRI question

    I have a 12 channel PRI installed, when I go into the system status app I see channel 10, 11, 12 are in service, and current state is blank not idle. I have reset the circuit at the smart jack with no change in status. Any ideas? Thanks
  17. TELECOSYSTEMS

    IP office time change

    This is my first IPO and I'm still learning the product. Could you elaborate on that TTT.
  18. TELECOSYSTEMS

    IP office time change

    Thanks, Manager was open last time I reset VM. I changed my time server to none and programmed from a phone, changed back to VM time server and will do a reset before the next time change.That should fix the problem, right?
  19. TELECOSYSTEMS

    IP office time change

    Ip office is using VM as time server. VM time is correct but IP office has not been updated.When does the IP office send the time request? Thanks.
  20. TELECOSYSTEMS

    Analog ports

    Thanks for all the input. Going back my 1st 2 posts, my problem was a constant busy the analog port was not ringing. That was my problem and that was my only problem. Sometimes we all get caught up in making a problem more complicated than it really is, KISS is how we all need to approach...

Part and Inventory Search

Back
Top