Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  • Users: GTexx
  • Order by date
  1. GTexx

    LAB 3640 Access Router Config.

    Thank you very much for your help unclerico, those links were helpful. I was able to successfully configure the 3640 as an access router. I quickly learned having the async module in slot 3 wasn't the best option and moved it to slot 0 which gave me the line numbers I required. I was also...
  2. GTexx

    LAB 3640 Access Router Config.

    Thanks a lot for the info. Unclerico, I will try it and see how it works out.
  3. GTexx

    LAB 3640 Access Router Config.

    I think I may have posted this in the wrong thread before. I think I am in the right place now.. I am trying to set up a Lab (CCNA) using the following equipment. 1. 3640 as an Access/Terminal Server ( I will connect to this via console, I won't access via network) 2. Two 2600 series Router...
  4. GTexx

    LAB 3640 Access Router Config.

    I am trying to set up a Lab (CCNA) using the following equipment. 1. 3640 as an Access/Terminal Server ( I will connect to this via console, I won't access via network) 2. Two 2600 series Router 3. One 2800 series Router 4. Another 3600 router 5. 3 Catalyst switches 12 Port, two 48 Ports...
    • GTexx
    • Thread
    • Replies: 0
    • Forum: Cisco
  5. GTexx

    Can I set-up a CCNA Lab with these equipment?

    ...where the issue lies.. I can Ping from R1 to R2 and from R1 to R3 successfully. Below is the running configs for each router. Frame_Switch (2610) ********************************* FR_RT1#sho run Building configuration... Current configuration : 1474 bytes ! version 12.1 no service...
  6. GTexx

    Can I set-up a CCNA Lab with these equipment?

    Thanks for the info. I will start setting it up tomorrow and erase all the current configs on the routers. I will use the links you provided to configure each router. I will let you know how it works out. Thanks again.
  7. GTexx

    Can I set-up a CCNA Lab with these equipment?

    Hi CiscoGuy33, Thanks for the info. it gave me alot of direction. I was able to scrounge around in our facility and I found a 2621xm, with (2) WIC-2T Serial modules in it. One in W0 and the other in W1, so that's a total of 4 serial connections from that 2621 router. 1. Can I use the 2621xm as...
  8. GTexx

    Can I set-up a CCNA Lab with these equipment?

    I am a newby to the CCNA, I have been doing all the readings and practice exams. I now want to set up a Lab and have access to the following devices, 1. Can I set-up these equipment as a CCNA Lab 2. What kind of cables do I need to inter-connect the routers given the available modules/ports...
  9. GTexx

    Any Experince in Nortel/Genesys CTI integration config using NicePerf

    Hi Henry, We running multiply CS 1000M's using NICE perform and Symposium Link (CTI) or now known as CC7 Toolkit. The option we use to record is DMSIP (Dual Media Stream IP). The phones are configured with the on the call server with the following features: ICR = Allowed AST = 0 1 (for keys 0...
  10. GTexx

    MML failed

    tnice: The end result was NICE wrote a script to correct the issues with the SQL database. After that was implemented we were able to retrieve and playback archived media. Now we are working on a new set of issues.. it never ends...
  11. GTexx

    PDT Question?

    ...impact the system in anyway? Trying to gather some information for a vendor and just want to make sure this is not service affecting in anyway. ******* See Commands below: ******* To verify the phone’s duplication: 1. On the PABX, press <Ctrl> + p +d + t. 2. In the PDT shell of a CS, type...
  12. GTexx

    IP Phone Codec???

    Thanks Crowtalks.
  13. GTexx

    IP Phone Codec???

    I found it, In the Maintenance, I went to LD 117 and then did "STIP TermIP" that printed all the detailed inluding the codec. Much appreciated.
  14. GTexx

    IP Phone Codec???

    I don't see "Resource" in Element manager, I running release 5.5, do it fall under another submenu?
  15. GTexx

    IP Phone Codec???

    Can someone remind me where to look to see the codec that the IP phones are using, I remember seeing this somewhere, but I can't recall if it was in element manager or in the PBX itself. I just want a printout to verify the codec specific 1120E/1140E phones are usings. Thanks much.
  16. GTexx

    End-Of-Life Product listing for Nortel ?

    Thanks Bigindian65, I was able to find the ones related to Symposium link, TM, Signaling Servers and Callpilot. I have to go hunting now for EOL's for line cards etc. Appreciate it.
  17. GTexx

    End-Of-Life Product listing for Nortel ?

    Hi all, Can anyone assist in pointing me to a link or support page that has the list of EOL applications/hardware for Option 81C,CS1000M, Callpilot V4,V5, Symposium Link V4.0,V5.0, Vxworks Signaling Servers etc. We are in the process of justifying upgrades and I just need the dates and...
  18. GTexx

    MML failed

    It's funny, about the host file, that's what NICE Tier 3 support suggested doing. That did solve our issue but it made things better. We are now not seeing any TSM Failures on archived media from EMC Centera. The media gets retrieved successfully. Now after updating the host file...
  19. GTexx

    Recording Mobile or Blackberrys thorugh CS1000

    Not sure if this helps, but I think the easiest way would to configure a set with "Auto Answer" active and have that set as a recorded user. So the mobile user could just call that set then call the other party and everyone would get recorded by the set configured on the system. If this is...
  20. GTexx

    NICE Perform 3.1 &amp; CS 1000E R6 Question?

    Just curious if anyone has implemented NICE Perform 3.1 with a CS 1000E HA with SMG's. We are currently running multiply CS 1000M's and will be migrating all our IP users to a CS 1000E HA with SMGs at the remote sites. I have a couple of concerns with NICE. 1. How to move from a distributed to...

Part and Inventory Search

Back
Top