Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. txteck

    Partner ACS - Incoming Call Issue

    AC voltage. 18 to 80 volts. If voice over ip. The port on the modem is normally bad. Can reset modem just as a test….
  2. txteck

    Avaya partner with expandsion cabinet ,5 lines not working.?

    Bell or whoever the vendor will not x connect lines to phone equipment unless lease equipment from them…..they would install if order right, another fiber modem to bring out Analog lines. But normally set up phone vendor for cut over….
  3. txteck

    Transfer denied

    Somewhat confused. Are you trying to transfer an incoming call back out to an outside line..could conference the caller and add outside person….they will drop off after they hang up
  4. txteck

    NS700, two phones can't call one outside number

    The carrier you are using can set up a trace call on your service and see what digits are going out. Have to set up a trouble ticket and make a test call while there overlooking the call. Would be my next step
  5. txteck

    Panasonic TVM 50 Voicemail

    By the way. TVS 50 is older VM it’s white TVA 50 is blue newer and would take different software to program You showed TVM……not sure what that is ?
  6. txteck

    Panasonic TVM 50 Voicemail

    U can google Panasonic TVA 50 and pull up installer manual. There are switches on side of VM that can be flipped. Turn off before and back on VM. Need laptop with terminal on it and serial cable to program
  7. txteck

    Panasonic TVM 50 Voicemail

    Only option is default and reprogramming No back door that i know of in 25 years of programming
  8. txteck

    panasonic pbx unified maintenace console software

    have lost my laptop that has the software for programing kxtda systems. looks like latest version is UPCMC V7.8.1.1 R14 and i see it offer for a price on DIGITALWORLDZ web site for a fee. has anyone used this site. looks like another tech site for posting. are does anyone know where to...
  9. txteck

    tva-200 device dial out from voice mail.

    have issues with the second device to be dial from any voicemail box in system. first device goes out within seconds and when not returned it is program to dial a second phone number. have put up a trace on voicemail and see the first port go out and dial number but not the second number if...
  10. txteck

    KXTDA-200 not picking up extention tones properly

    Voicemail sents that info to the PBX.. If you see no issues with transferring calls to ext within the PBX than I would expect the voicemail. You can turn off voicemail and restart to see if that helps or unfortunately replace the voicemail. Good thing there pretty cheap on the used market...
  11. txteck

    KXTDA-200 not picking up extention tones properly

    I am assuming this is the auto attendant on the voicemail? Not a receptionist transferring a call after it comes in
  12. txteck

    tda 100

    will a kxdt 343 work on any version software for tda 100 or 200
  13. txteck

    ring group

    usa..................
  14. txteck

    ring group

    using the 1232 laptop software, i am trying to set up a ring group for the voice mail to send calls to 3 or 4 extensions if one is busy. have set stations in a separate ring group 293 i think, set that ring group to ring, and put that ring group into the voicemail to send callers too. but does...
  15. txteck

    Nam will not come up after software upgrade

    have two NAM i upgraded both do the same thing after patch installed. both were working before patch but both 1999 mod and neither has a video card. have taken out hard drives and install in one that has video card in it. booth up pass the a booth then goes to c drive and continue to run. a...
  16. txteck

    Nam will not come up after software upgrade

    trying to fix dn redirect. through the upgrade you sent me was to take a NAM 4.0 to a 4.1 to fix that issue. have 7.0 software, it see nam but cannot fwd to mailbox just back to AA. will this patch work on eailer release. have no way of knowing what it doing no video card in my 1999 nam...
  17. txteck

    Nam will not come up after software upgrade

    just realized that the two NAM in question do not have a card in them for a mouse or monitor. both have RJ 45 in them. now what
  18. txteck

    Nam will not come up after software upgrade

    Have updated a 4.0.04c NAM with the redirect DN software and the nam will not see the phone system. have done this on another NAM with same results. have a couple of floppy that have the same dir on them after i unzipped the download and have use one in the past to upgrade at least 4 NAM with...
  19. txteck

    fiber nam voicemail

    yes i have saved it. will try next week to update. thanks for help.
  20. txteck

    fiber nam voicemail

    this could be a problem, i assume i would need a floppy disk and do i power down the NAM and install the floppy and power back up the NAM? may be easiler to install a flash.............

Part and Inventory Search

Back
Top