Search results for query: *

Samsung OS7030 with 3 DS-5014's. On one extension, 202, the hold button is blinking. Only 2 trunks coming into system and neither of them are open. I did perform an mmc890 DB Init on that extension and the light went out 2 weeks ago and now it's back. Any suggestions on how to make it stop...

11-07 Created Dept. group pilot x100 group 1 16-01-02 = Priority 16-01-05 = Automatic 16-02 ST500 and Digital Exts in group 1 When pilot number dialed all my ST500 Exts ring and only digital phone x111 rings. Digital phones x101 thru x110 do not ring. Would like all phones to ring at the...

Have a SL2100 with users using the ST500 app. Trying to have ST500 extensions ring in a group with digital extensions. Setup a VE and programmed it on a blind key on a digital extension and it worked as expected. However, the system allowed me to program the VE on a ST500 extensions function...

Thanks! Thats what I needed.

Need to program the ability to go from one DAT to another. For example, If in DAT001, greeting will be "For Payment Info press 1". Caller is then transferred to DAT005. Any help would be appreciated. Thanks

I'm on necntac.com and that version is not listed for the SV9100. The latest version on the site is v11.00.50. Do you think that version will work. If not, where can I find the latest version? If you know.

Just downloaded the latest version from NEC. 10.50.50 for cp10. When i use WEBPro the software level says A12.10.50. Should I be using a downlevel version of PCPro?

Have a SV9100 with a GCD-CP10 processor. I can connect with WEBPro no problem but need to use PCPro for upgrade to a CP20. When I try to use PCPro I get an error: "Can't connect because it does not support encryption" I'm using version 10 of PCPro for a CP10. Any help would be appreciated.

System is a SL2100

Receptionist needs to go away from desk. Need to know if receptionist can send incoming calls temporarily to another extesion? The extension number she needs to send incoming calls to could change from day to day. I know I could just program another mode to accomplish this but since the...

Trying to set the SL2100 as the DHCP server. Followed instructions the best I can but ip phone responds with "DHCP server not found". 10-12-01 = 192.168.20.254 10-12-02 = 255.255.255.255 10-12-03 = 192.168.20.1 10-12-09 = 192.168.20.69 10-12-10 = 255.255.255.0 84-26-01 = 192.168.20.70...

Is there a way to change modes remotely? User has 3 modes: Day, Night, Weather.

Greetings! SL2100 Digital 12 and 24 button sets. I've programmed a DND Override button on the receptionist phone x101. Tested with x105 in DND ALL but when I test, call still goes to VM. Tried using the preprogrammed code of 707 and get the same result. Am I using the button incorrectly or am...

try going to 5.9.1 and make sure ext is set "EXT, MAILBOX, OR BOTH

Try Power3 Communications out of Foxboro MA

My system has been experiencing Watchdog alarms and reboots. Haven't been able to find info on what's causing it. Any help in the right direction to fix issue would be appreciated. I've already swapped proc and cab and it still going on. OS7200s v4.99

Occasionally when I try to access vm on an MP10a or MP20s the system looks like it's working fine then I get disconnected and have to login again, reboot the system, then after reboot I can access vm. This only happens on embedded vm on the proc. The mgmt white list is good and the vm system...

Thank you Ian. Was able to get it working using feature NPG (network paging). Then mgmt. changed course on me and purchased a Valcom product - VIP 801A. Basically its a paging over eithernet device. Works good. Thanks again!!

Just completed a 2 node system install. All is working as expected except for network paging. Cannot find any info on how to set it up. Building 1 = OS7400 with overhead paging, Building 2 = OS7200 with overhead paging. How can I page the overhead speakers from building 1 to building 2 and...

Just installed a new ip office system with 21 digital model 1416 phones and 7 incomming trunk lines. Right now all phones ring when a call comes in. During business hours(8am - 5pm) I only want exts 10, 11, 13 to ring. After hours I only want exts 12, 20, 21 to ring. My other problem is ext 10...