Search results for query: *

Sorry about the previous post and assuming your could understand my words. Let's start over. I went back to the site today and decided to give the VLANS one more shot. All ports on my switch are set to VLAN3 (192.168.1.0) except for one which is set to VLAN2 (192.168.220.0). From the PC on...

OK, I haven't gotten the above to work so I am going another route (no pun intended), hopefully. I will keep all PC's on the 192.168 network along with the Win2k server. All are attached to the HP 2524 Switch. I just want to be able to get to the other agency (10.200). I went there tonight and...

I'm back!!! OK, I tried what you said and still had some difficulties. I added a 3rd VLAN, and once I did this I had the trunk port on the HP switch show up so I can tag or untag it for all 3 vlans. When it was just the 2 VLANS, the trunk port wasn't showing up in the VLAN port configuration...

Yes, I am starting to understand VLANS, much too slow for your liking probably!! What commands are necessary, and where do I put them, to do what you posted here: Router 1721: VLAN1 subnet is 192.168.1.0/24 with default gateway 192.168.1.1 VLAN2 subnet is 192.168.2.0/24 with default gateway...

Sorry for the confusion. I did set up FastEthernet 0 with subinterfaces 0.1 and 0.2 how you suggested. I get the error message when I add the routes on the router, which I assumed (again, wrong probably!!) was what was needed to do the following from your directions: Router 1721: VLAN1 subnet...

Another thing I am not sure about is the tagged and untagged. My e0.1 is showing "native" on the end of the encapsulation command line. Do I set my ports on the HP switch to tagged or untagged and is the "native" setting OK on the e0.1 port of the router? Thanks again, Jeff

Thanks for your help so far. I am trying what you said and when I put the default gateways in it says something about the next hop being the same device???

Do I assume correctly that the 1.1 gateway is the switch and the 2.1 gateway is the hub? Thanks for your help so far, Jeff

OK, forgive me but I am still a little confused. I have networks A (vlan1) and B (vlan2), a 1721 router with a 4esw switch module, and an HP 2524 switch. Some people on B need full access to network A, while others need just internet. Network B is coming from a hub located in a neighboring...

Hi, I am trying to set up 2 vlans between a 1721 router (using the 4esw 4 port switch module) and a HP 2524 switch. I am getting confused on whether or not I need trunking, spanning tree, etc. The way I have it set up now I can ping from the switch side to the router side, but not from router...

Thanks for the quick reply. We will actually only have 1 domain and 2 DC's so that wouldn't be a problem. The security issue we knew about, but his thing is why do we need all the workstations registering with DNS? I know that it can be turned off at the client so that's not an issue either. He...

Hi, Novell guy here who has been told to get Win2k3 AD up and running. I am wondering if Dynamic DNS "must" be turned on for AD integrated DNS or is just a good idea? If it doesn't have to, but should, can I have some reasons. My boss doesn't like the idea of DDNS, but from what I have read it...

Well, we will only have one domain (for now, never know in the future). We are a Novell shop who have been told by the IT Director that we are dropping the superior product and must go with Win2k3;) Since we are Netware people, we are used to the tree name, where it is just one word. My...

Hi, We are setting up DNS on a Win2k3 server, with Active Directory coming on board soon after. I was wondering if instead of the normal abc.xyz suffx can you go with a suffix of just xyz??? This will be for internal use only, not internet. Thanks, Jeff