Search results for query: *

SOLUTION FOUND !!!! I had to download and use the "DriverMagic Utility" (Driver_Wizard_setup.exe) which showed all the drivers on my computer and their UPDATES. For "CRYSTAL WDM AUDIO DEVICE" it showed the updated file (Crystal_CS4235_w95us272.zip) which I downloaded from the DriverMagic...

...- code 28) I also tried editing this INF file by removing the only TWO references to this (second) Crystal Audio detection . . . [Crystal] %*CSC0100.DeviceDesc%=CSC0100_DEVICE,, *CS010F [CSC010F] ; This device is used as a place holder for a logical device that's been removed QUESTION...

Hello: In Device Manager - Sound, Video and Game Controllers (Win98SE) . . . Crystal WDM Audio Codec (!) Crystal WDM Audio Codec Crystal WDM Audio Control Registers PROBLEM: In safe mode I delete those TWO "Crystal WDM audio Codec" entries and restart the computer. Then, this "Crystal WDM...

...HDD as "SLAVE?" First off: the basic concept of SCSI is totally different to IDE. There is no "primary master", "slave" and whatnot. SCSI is a *Bus* unlike to IDE - which is just a harddisk attachment interface (well - okay: and for CDs and some tapes). SCSI has a host controller and...

Hello: HARD DRIVE = IBM DFHS S2F 2GB (FRU 76H0955) SCSI 50-pin (S/N: 68 B43506 F4) STICKER LABEL = GFM2266268 ( DATE: 22/96) So far I have setup this 2ND hard drive in it's bay (above the Primary Master HDD). The Jumper Settings (on FRONT of HDD) "were" set the SAME as the Primary Master ...

Hello: I've been given a used 40GB Maxtor N40P Hard Drive and am wondering if my OLD 1998 Computer/Motherboard, etc. will accept this large hard drive or not. Must I create 8GB partitions or can I make two partitions of 15GB and 25GB ???? I tried this drive as PRIMARY SLAVE - but got a HARD...

SOLUTION FOUND !!!! Hello, again: To fix this problem, I had to go "START - RUN - MSCONFIG - ADVANCED - LIMIT MEMORY TO 288MB" . . . . and "UNCHECK" that Option. Now, my OS is detecting the whole 320MB of RAM. There was nothing wrong with the BIOS, Memory Modules, or OS...

JUST WONDERING . . . I read somewhere, "THE KERNEL IS CONFUSED ABOUT THE AMOUNT OF MEMORY IN YOUR SYSTEM." Try booting with "extra parameter" . . . MEM=320M I remember the word "APPEND" - so maybe it said, APPEND MEM=320M MY QUESTION: How would I try this...

SYAR2003: Memtest tested 320 MB; it said, "Testing 96K - 320M" on the screen. TekTippy4U: Thanks for the suggestion about a BIOS UPDATE - which I have put off long enough.

Hello again: MEMTEST-86 v3.0 did NOT find any errors after 4-hours. However, the documentation on this program does not really explain HOW to run it . . . so I just let it run automatically after I rebooted. I guess NO "extended tests" were performed because I don't see HOW to...

JRBARNETT: Hi, John. It's funny, I was just reading about "Memtest86: A Stand-alone Diagnostic" to see HOW to run it. Then, decided to check this post and saw your suggestion. So, I'll run MEMTEST86 from a floppy and see what turns up. I should just go and buy another 128MB -...

Hi, BERTON: I am not sure what you mean (Shared Memory). . . the "Cirrus Logic 5446 PCI" is NOT a "Video Card" - but an ONBOARD VIDEO CHIP. Can you explain a little more about what you asked, how I can check-out what you are asking me? Maybe this 64MB Memory Module is...

jrbarnett: My PC always detected the 288 MB I had installed. Then I exchanged the 32MB module on this machine with this 64MB module from IBM machine. That "other" machine showed Memory as 48MB . . . yet, it contained this 64MB module, as well as, a 32MB module. So on the...

Hello: When I start my computer, my DOS POST "Memory Test" shows . . . 327680 KB. After Windows 98se starts up, in "My Computer-Properties-System Properties" it shows only 288 MB RAM. QUESTION: Does anyone know why 32MB of RAM is NOT being detected by Windows 98se, yet...

Hello: In the START button Menu it says, "Log Off Tommy" (right above the SHUT DOWN button). Is there somewhere in the Registry that I can disable this "Log Off Tommy" and prevent it from appearing in the START MENU. I have accomplished this with "Favorites, My...

Hello: After days of research, here's what I found . . . My "Domex DMX3181LE SCSI Interace Card" was jumpered as PLUG-and-RUN . . . so I changed the jumper to PLUG-and-PLAY. This card was now detected as "DTC436E" and needed it's own driver. No matter what driver I...

Hello etarhan and bcastner: I followed your advice and successfully disabled COM1, however, I do not notice my Scanner detected in either Device Manager or Control Panel, or anywhere. I am able to use my scanner correctly, but I thought I was going to have to give the Interface Card an IRQ...

Hello Etarhan: I like your idea of disabling COM1 . . . but I am not sure if I should. Communications Port (COM1) I/O: 03F8h-03FFh Device Drivers: C:\Windows\System\SERIAL.VXD C:\Windows\System\SERIALUI.DLL 56000 BPS PnP Internal Modem IRQ3 I/O: 02F8h-02FFh Device Drivers...

...LEGACY Device 10 - Intel 82371AB/EB PCI to USB Universal Host Controller 10 - IRQ Holder for PCI Steering 11 - IRQ Holder for PCI Steering *11 - IRQ Holder for PCI Steering ( *11 shows only in IRQ printout ) 11 - RAGE PRO TURBO AGP 2X 12 - Standard PS/2 Port Mouse 13 - Numeric Data Processor...

Well, the fire is out, the fire engines have left, and here comes my neighbor with his garden hose. Oh, ZIPDOG where were you when I was going crazy? :>) Very good information, though. You probably ran across my post afterwards - but maybe OUR solutions will be of help to someone somewhere...