Search results for query: *

when i removed it from tn 20 0 5 5 and put it on this tn it did not go to voicemail .....i had to put it back REQ: prt TYPE: tnb TN 4 0 3 12 SPWD DATE PAGE DES DES 5117 TN 004 0 03 12 TYPE 2616 CDEN 8D CTYP XDLC CUST 0 AOM 0 FDN 7500 TGAR 2 LDN 0 NCOS 3 SGRP 0 RNPG 67...

i like to know how it works guys ,key 2 dn 3807 as it own voicemail box 3807 ... how are calls forwarded to that mailbox , tried removing it and putting in on and other tn , has scn and addind XMWK 7500 3807 did not work REQ: prt TYPE: tnb TN 20 1 5 5 SPWD DATE PAGE DES DES 5094...

i checked in ld 22 prt adan on that tty and the settings are ok ...what could cause the echo ...and how do i check the config of the enter key ??

but when i unplug the lantronix and go serial i use the same password and username and get in the switch?

but when i unplug the lantronix and go serial i use the same password and get in the switch?

i guys it works i finnaly set up the lantronix but when i telnet into it i get this AUD000 TIM3008 17:00 25/9/2008 CPU 0 AUD000 TTY 02 SCH MTC 17:25 OVL111 IDLE 0 > TTY 02 SCH MTC 17:25 OVL111 IDLE 0 >logi user1 logi user1 PASS? TTY 02 SCH MTC 17:25 OVL111 IDLE 0 > ...

?ŠÔÔÙ °´ ÍÔàÂÕÇ   ±¶º³´€?ŠÏÖ̱±± ÉÄÌÅ   ° ?Š¾ this is the garbage i see when i plug the uds

guys i,m trying to connect a lantronix uds 1100 to my switch i' can get into the http confg page but no luck telnetting into in i tried following the cues form this post but no luck !!!

we had a huge storm here and we had alarm 42-0 on all sets but all is back to normal how do we clear that alarm from the displays ...i think it can be done from the attendant console if yes how ??? ty

is it a medical clinic that forwards all its calls after 5pm to another clinic before i came a put in the ring group all worked fine !!! but now it takes then 10 or 20 tries before the call forwarding works

if tfd is set to zero then it is not set ???

...5 0 NEDC ORG FEDC ETH HOLD 02 02 10 SEIZ 02 02 RGFL 02 02 CDR YES INC YES LAST YES QREC NO OAL YES AIA NO OAN NO OPD NO CDRX NO NATL YES MUS NO TTBL 0 OHTD NO ALRM NO ART 0 SGRP 0 AACR NO REQ: AUD000 TIM7481 15:00 4/8/2008 CPU 1 **** OVL000 > OVL000

guys last week a programmed a ring group for the attendant and an assistant beside her, (ring group 001) that works fine but since then they have problems call forwarding their calls to another center after hours...they do *70 then the external nummber release button then night .... thanx

big indian can you elaborate on the acod !!!! changing the dn is not an option

guys!!!!!!!!! at the hospital i work at ,we have a building wide intercom for emergencies dn40 that can be used from all phones, but sometimes users dial it by mistake or keep it off-hook ,i can go into ld 80 and do a trace ..but is there a way to send an alarm to the attendant console...

i read on another forum this in a thread "If the co trunks are pri, bars sends all digits at the same time no matter if you try to send a pause or not. The digit stream sent does not stop, or pause then send the rest " is there a way to bypass that if that is true ??

...03 ADL 16 91450xxxxxxx 04 CFW 4 7000 05 ADL 16 91450xxxxxxx 06 MWK 7000 07 08 ADL 24 9514801xxxx 09 ADL 24 9*450359xxxx***2894 10 ADL 24 91514420xxxx 11 HOT D 16 9450359xxxx*2894 12 ADL 16 9450359xxxx 13 ADL 16 14 TRN 15...

...there is a code 790 before the 9514xxxxxxx the number of the other center what does the 7990 means and where do you program that thank u REQ: **** OVL000 >ld 23 ACD000 MEM AVAIL: (U/P): 2421587 USED U P: 594756 129384 TOT: 3145727 DISK RECS AVAIL: 290 ACD DNS AVAIL: 224 USED...

thank you so much it worked i had to map the f5 key in procomm using Options>keyboard editor>F5 key and change that to [O^M

i guys we are having a problem trying to add a mailbox to a user we get this message "another mailbox is using this extension as an extension dn" we have a mermail 12 this is the tnb of the user TN 14 00 DATE PAGE DES DES 2272 TN 014 0 00 00 TYPE 2616 CDEN 8D CUST 0 AOM 0 FDN 7000...