Search results for query: *

First of all, you need to do reg-tdcsu:x-x-x-x; Then you need to do for each PRI dis-tdcsu:x-x-x-x; and find the TGRP parameter (trunk group number). If the TGRP is the same for all trunks, then you can remove any trunk PRI from this group. You can use it for new assignments. If the TGRP are...

STMI is a gateway, it does not perform error checking. If the switch port where STMI is connected is ready, then STMI considers that everything is in order.

Please.

There is no way to set the Customer's IP address using the Comvin. "This command STA-UW7, which acts as a Telnet client. After the start a Telnet connection is established via the Atlantic LAN to the IP address and the TCP Port which are entered (parameters IPADDR and PORT). The IP address of...

I don't have any practical information on extreme tuning. Look at the address https://wiki.unify.com/wiki/Collaboration_with_VoIP_Providers Hints for all Providers Concurrent calls via ITSP (depending on the available bandwidth and used Codec). 30 for OpenScape Business X1 up to 120 for...

Remove some parameters in COP CHA-COP:COPDEL,8,EOD&SFRM&BR64&TDED; Make a trial dial of the number. To return the deleted parameters, do CHA-COP:COPADD,8,EOD&SFRM&BR64&TDED;

Please show reg-cop:8;

It happens that after some time, 2-8 hours, information from a defective HD disk can be read. These are temperature defects. So do what SBCSU asked you to do. DIS-DDSM; and display the results here - thanks. ! But the HD disk is faulty anyway! What you can do can be determined experimentally.

It seems to me that this is the Hicom 300H V3.0.6 software version (P30252-N4106-B000-00). Take a high-resolution photo of all the system shelf modules for a complete understanding and photo of the processor board. You will have big problems by yourself-recovery of a disk that has a SCSI-1...

This is a package of hotfixes files V10.0.28. https://dropmefiles.com/r5gnL

A large amount of information. I'll send it through the drop zone.

Choose your option

For basic SW versions 6.2.15 and older. You need to use the instructions.

It seems to me that you need to replace CMS with CMA. This is a recommendation from the documentation. And show us the pictures Settings - Cordless - System-wide and so on.

Please show reg-sbcsu:XXXX; new manager number. reg-sbcsu:YYYY; old manager number.

Try to save the database to the SD card via Assistant T, if I remember correctly, menu item 28-2-1. You will see the function value on the phone display.

https://www.123.com

Probably, yes. Try to do it and see.

Hi! When programming ISDN, it is strictly necessary to install one master device and another slave device with the same protocol. Which side of the master is which slave doesn't matter. Usually the master is a PBX.

Try the VT100 terminal.