Search results for query: *

Hi, I have a strange problem. I have a lot of ftp clients uploading files to me. No problem, everything works perfect. But I have one client uploading 160 documents. It works fine until the 158 document is being processed. Then it stops. If I try the same procedure on lan, going around the...

...rtpmap 10 set security-association lifetime seconds 3600 kilobytes 46 08000 crypto map rtpmap interface outside isakmp enable outside isakmp key ******** address 130.x.x.12 netmask 255.255.255.240 isakmp identity address isakmp policy 10 authentication pre-share isakmp policy 10 encryption...

Hi there, I have a Pix 501, that should have an ipsec tunnel to an 7204vxr. I have configured a few Pix 501's before, but I have never configured an ipsec tunnel to an 7204VXR before. Anyone have an configuration exsample? Also the compagni with the 7204VXR exspect me to come from 72.23.70.32...

Hi, all I´ve configured Pix before with VPN (pptp/cisco client), but never tried to play with the vpn certificate option. Could someone explain shortly how it works, what it takes to make it work and what the advances is? Tia A newbie to Certificates

Hi, I found a solution to the problem. There is no solution :-( You cannot have a pure IPsec tunnel on and Isa server. It must be with l2tp. /LC

Hi, I'm trying to set up a ipsec tunnel between a Windows 2000 Isa server and a firewall called Q-networks. The tunnel is running and by port sniffing a client on my subnet I can see that a Ping request from the other subnet can reach my client(so the tunnel seems to be working). And the...

Well, I aint getting much help from any of you, but this is what I have found out so far. 1. When you make an DMZ Zone in Isa you cannot use a private ip range (It is possible, and you can publish a web server, but it is impossible to communicate with your internal Lan from the Web server, and...

Hi, First: - I run "Allow VPN Clients Connection" wizard has nothing to do with the Cisco client Vpn. The - I run "Allow VPN Clients Connection" wizard is if you want someone to be able to access your Isa Firewall by the Microsoft Vpn Client. Second: Have you tryed...

I'm trying to make a dmz for my webserver, using isa and 3 nic's. It isent working and it is because i have used private addresses (172.16.1.0) between my Isa and Web. My lan is 192.168.1.0. Well to get to the point i now have to make a public subnet between my isa and Web. How is that done ...

Hi again, Found out about the ftp problem. The easy'st way is to Publish the sever under web publishing rules (my server is already publish since i have a website on it). Then just configurer the ftp service to only allow access from the internal network (by default all is deny'ed access except...

Hi, What Should I do to allow my internal network to ftp/use terminal services to my web server on my dmz. i'm using isa with 3 nic's in it. Tia LC

Is it possible to make Gateway to gateway VPN between a Microsoft ISA Firewall & Cisco Pix 515 ??? TIA LC

Hi again, getting closer to a solution (i hope :-) Now i have updated ios to 6.22 and the PDM to 2.11. I still cannot ping,telnet,http any host's on the inside lan. This is however what the pix is telling me from the log 111009: User 'enable_15' executed cmd: show logging 106011: Deny...

Hi Yizhar (and others reading this), I've now used the copy tftp flash:pdm and is working now. The problem was that i was using the copy tftp flash command without the :pdm Thanks for the Answer Yizhar !! LC

Hi ! :-) Need some help on this one, Trying to upgrade the pdm in my pix. Have already upgraded the Pix IOS to 622. I'm using Tftp, after 20 seconds where the pix is uploading is says Out of memory, image not installed. What should I do to upgrade the PDM to the newest version ? Are there a...

I meant the IOS, if I hear anything I will let you know, Bye LC

Hi, If i am understanding this properly, I had the same senario some weeks ago, and was told that the current firmware dosent support that. Something about IPsec/headers. I wanted to use the cisco VPN client throug a pix 501 to connect to a pix 515, Was told that a new firmware was under way...

Hi,Yizhar (and others reading this :-) This is what the Pix tell's me after i connect with my VPN client and try to ping the internal Network. What is the command to get the pix to "tell" me more than this ??? pix(config)# sh log Syslog logging: enabled Timestamp logging...

Hi, One thing more, When I connect with my Windows XP to my Pix 501 I get this ip/subnet/gw 10.0.0.1 255.255.255.255 10.0.0.1, That is not correct is it ??? Seems to that I should have the mask 255.255.255.0 and the pix as gateway ????? Tia

Thank you for your answer, Tryed the No nat lines but it is still not working. You write something about using Syslog. I know very little about cisco can you tell me a little bit about it ??? Tia LC