Search results for query: *

OK, thanks Had a quick look at the manual, I will work it out but does not seem immediately obvious how to program the trunk to a key. Thanks again.

Hi, Thank you for your reply, PC Pro, Prefer to use PC Pro as much as possible but I guess need to use the MLT to program some features? How do I assign a trunk number to the keys. Is there is a manual or instructions? I could not find anything that had that sort of detail for programming...

The line keys, the top 2 lines of my 24 button mlt. The top 2, from the left, light up red when one or two lines are used. This one I would like to be able to pick up & press a spare button & get the SIP line. My 2nd MLT (SIP) I don't remember programming (but must have) lights up 2nd line...

Hi, Have SL1100 & two MLT 24 key. One came "as is" & uses the 2 ISDN lines as normal. incoming & outgoing I would like to pick up handset & press e.g. 3rd soft key & get the SIP line The first 2 I guess are OEM line trunk 1 & 2 I should say currently because there is a fault on my ISDN lines...

Hi, Been a while since I have needed help SIP trunk working well on my SL1100 however as not been programming for a few months already rusty so thought I would ask rather than trial & error. Looking to move broadband providers and the best so far does NOT have Static IP. I mean WAN IP & not...

Thanks again, I had already removed ports 80 & 443 but left the PcPro port but changed from the 8000. This allows PCPro access as long as I change the port number each time I try to connect & all OK and as far as I can tell now does not allow web pro access, "this site cannot be reached" so...

Hi, Many thanks for that information, I don't need or want programming from the internet/router, just locally but was not sure If I could do that. I can/will change the ports but could I also remove two? Anyway to have purely local? If I remove both 90-54-01 & 90-54-03 i.e. delete so blank...

Hi, Got hacked the last 2 nights & lost £91 (thankfully no more, my account top's up & stopped after 3 quick £20's, not sure why but pleased) Sipgate Trunk but don't think their fault but not 100% sure First night got email from sipgate - call blocked to high value overseas. no lost money. I...

OK, thanks So the brrrrr for the ISDN trunk must be at the providers end i.e. BT. & the continuous tone for the SIP trunk must be from the Sip trunk provider. i.e. Sipgate. I guess perhaps change the internal dial tone to something very different from the two others. Fine for ISDN trunk as...

Hi, SL1100 Is there a way to change the dial tone for a Sip trunk once pressed 9 for outside line. Is is exactly the same as the tone as when first lifted handset for internal etc. The ISDN trunk has a very different from the tone once pressed 9. more of a brrrrr I have looked at Service...

Thanks again, I am actually having to back up a little with more pressing issue, I now am concerned I am going to struggle with concurrent incoming & outgoing calls sipgate on my package has 1 trunk but specs says concurrent calls: 2 incoming/100 outgoing I now think this is a problem for the...

Thanks, could not access the file from engineering downloads Just a blank page, I do have most of the manuals, if it was one of those

Many thanks for already taking this much time on my problem. I would be happy to send my config file but really don't expect you to trawl through that. Would not know how to send securely either. If you think CID should pass through on DDI fall over & even with just 1 SIP trunk I may try some...

...that outgoing capacity. Also shame it just does not pass through the number anyway, when I use DDI fall over on No answer and it rings out mobile* bin 001 ext 26, I am guessing somewhere it had logged the incoming Caller ID for it to be able to pass through on trunk to trunk. This has been...

...need to set 24-04 automatic trunk to trunk transfer (or poss 24-05) but what do I put, If 24-09 call forward fixed, Already has ext 26 (bin 1 mobile* number) what is the point of a bin number in 24-04 trunk to trunk target, is this for something different. Ext 26 = Bin 1 is Mobile* Menu...

Hi, Thanks for advise, unfortunately does not work, not sure if the way I am transferring is technically trunk to trunk - Actually had trunk to trunk un-ticked! ticked now. as above using 22-11 DDI Translation table - I used departments for DDI (have no idea why, set up years ago, but works...

...since told not simplest way) 011 5161 45161 SIP No Answer 3 (after 20 secs ring external number) 3 is ring group with ext 26 Mobile* linked to Speed dial 001 which is my external number. As I say works, but would like org caller if is at all possible. Not sure if I should...

Hi, Sorry I have asked a few questions on this forum about moving my SL1100 to SIP from ISDN & very grateful for advise so far On sipgate trunk It seemed to be progressing well apart from this problem Every now & then I get a busy tone when I try to dial out. I can always ring into the...

Hi, Many thanks for that. No licence, not sure if you still can & where to buy UK & cost if not really essential especially as SL1100 is sort of obsolete Also looks tricky to set up but will read more. The # worked, I remember now reading something about timers and I had altered 20-31-05...

Hi, Yes I have the VoIP db & 2 statics, Is actually working, can dial in & dial out but not 100% yet, think some setting with the PBX need tuning, 20 seconds before starts to ring when dialing out Also only intermittently get the dial tone when trying to seize the SIP trunk. perhaps 30% of...