Search results for query: *

Latest version is actually UPCMCv7.8.2.1 And there are two versions. Global Version & the US Version

Unforunately Panasonic has one Network port and that SIP Trunk is a Peer SIP Trunk. How about you create a subnet in your router which is within the subnet of the ISP and setup it up to be accessible across your AN then connect your router to the ISP router. Grandstream used to have a similar...

How about if u change your Router to be on the same subnet?

Hello, I would appreciate your help with the following situation. What is the best way to unify these networks? I have the MikroTik Ethernet port 5 available. I need PC1 to be able to use the softphone as before, when the PBX was on the 192.168.10.0/24 subnet (back then we used analog lines)...

Try to look at Algo. https://www.algosolutions.com/products/ip-intercoms/ You could intergrate it to your Panasonic. I remeber intergrating Panasonic Door phone system to Asterisk server way back. The reverse too is possible

Looks like it is already in a later firmware version. No need to upgragde. You will need the MC to upload the license. About a VoIP door station. You can do an intergration with an ATA to have a VoIP door station. All you want to achieve is possible. Just need the tools/devices and that's it

If its a USA version, i would recommend u dont mess with it alot. I have supported a few and you wouldnt want to do certain things u aint sure of. First they need to be registered and upgrading may mean re-registering the SYSTEM. You need dealer access to the files. The US Version of Maintenance...

i had copies, will check out.

Kindly share what you have. I have version 9 too but there are additional digits after the nine. I think they help determin

What is the outbound caller ID of Ext 711 in Asterisk? Leave Trunk in Asterisk CID blank

Can talk using VoIP. (PC-to-PC talk) = same network? can u play a Pre recorded file on the other PC and it is sent to your PC).?

The software i suppose is installed on a seperate machine . I remember a lic is required thuogh you can download it online. I had a copy. Need to check. Lots of documentation i had collected since i was doing pan. But with Pan gone, i let off most tools and docs

The system is not registered/Activated. Typical of systems used in Americas region. I once activated a KX-TDA50G. It was giving a similar message. The client was based in Caribean but had bought it on Ebay.

Yealink has MS Teams compatible phones

Error code 43, subcode 40001 on a Panasonic KX-TDA system typically indicates a problem with the device's driver or hardware, potentially a failed device or a driver issue.

Then check cable.

Does the Main Unit see the BUS card?

https://vtda.org/bits/telephony/Panasonic/KXTAConsole.exe

A Panasonic Tech would defintely have it. I had the Global and USA version. Will try looking it up

Why dont you confirm by attempting to make calls either inbound or outbound