Search results for query: *

I need to create or modify a speed dil button on the receptionists prhone wich is a 7960 so that the last speed dial button would call up to (4) other people or Directory numbers if she required emergency assistance in the reception area. This way if one person was not available others could...

Haven't delt with this in a couple of weeks. Tested te client from outside and now I can not authenticate to the firewall.

...NANR vpngroup NAN dns-server 10.0.0.5 10.0.2.5 vpngroup NAN default-domain nationalable.org vpngroup NAN idle-time 1800 vpngroup NAN password ******** telnet 10.0.0.0 255.255.255.0 inside telnet timeout 5 ssh 10.0.0.0 255.255.255.0 inside ssh 10.0.0.0 255.255.255.255 inside ssh timeout 5...

Dimpa1 - I am trying to access a 10.0.0.xxx list of devices here are the access list. access-list cached ACL log flows: total 0, denied 0 (deny-flow-max 1024) alert-interval 300 access-list inside_outbound_nat0_acl; 1 elements access-list inside_outbound_nat0_acl line 1 permit...

I connect to the firewall but that's it no access to the internal network. Either mapping a persistant connection or new connection. I can not ping any internal hosts either. Any ideas, What would I need to add or change in the access-lists? Thanks

Dimpa1 - This did not work. I added the ACLs but I can not get onto the remote network. I hit the Firewall just fine but I can't get onto the 10.0.0.0 private network. Any other Ideas?

...vpngroup NAN default-domain nationalable.org vpngroup NAN split-tunnel NAN_splitTunnelAcl vpngroup NAN idle-time 1800 vpngroup NAN password ******** telnet 10.0.0.0 255.255.255.0 inside telnet timeout 5 ssh 10.0.0.0 255.255.255.0 inside ssh timeout 5 console timeout 0 dhcpd lease 3600 dhcpd...

Does anyone know if you can connect a PIX 506e behind a Linksys RV042 and disable the linksys firewall. I would like to use the Pix for site to site vpn and client vpn connections. The Linksys will go away and a Cisco router will take its place. Getting the Linksys to perform client VPN is not...

Is it possible to connect to the Linksys RV042 from a remote internet connection via vpn client software and if so what client software works with the RV042? I tried Microsofts but too complicated. Any help would be appreciated.

You can connect to yoor work network or your home network if you need to. What you need to do is map a network drive to the required share if you have access to it. You can test this by performing a net use \\servername\sharename or \\server ip\share name to prove this. If this works then...

I am new to Linux and had a few questions regarding performance and configuration. First the Linux box is configured to be a Firewall, and VPN. The server was configured by someone else and I am not a Linux expert by any means. The linux box has two interfaces one for the lan and the other...

I can not get access to the public folders from the exchange 2000 server console. How do I correct this problem? Thank You, Gerry

I have a problem where one of our vendors has a VPN tunnel setup for them to receive FTP files from us over a secure VPN tunnel. On our side we have a Cisco 2611 and on their side they have an older Intel Firewall? We changed ISP's so our external IP range changed and they had to change their...

How much DRAM and flash are on the router. You need to make sure your hardware requirements support the IOS installed on the router.

It still does not work. I amtrying to telnet into a router them to its aux port which then will go into the remote switch/routers console port. no modem involved.

interface Loopback0 ip address 172.21.0.1 255.255.255.0 line aux 0 no exec transport input all speed 19200

I configured the Aux port on a router so that I can reverse telnet to another routers console port but it still does not work. Am I doing something wrong? I am using IP 172.22.0.1 as the loopback address and 2001 as the port. I configured aux port speed to 19200, transport input all and no exec...

Thank You

How do I Administratively shut down BGP on a router?

We have a Cisco VPN installed and working for everything except for our VOIP or should I say SIP system. Connected to our VPN is a Cisco 2950T switch and I want to allow users connecting to the VPN to launch a client on their local PC to initiate a call as if they were located physically in the...