has anyone out there been able to utilize/integrate any of the Audiocodes MP-112, MP-114, MP-118 VoIP Analog Gateways with Call Manager? I am on CUCM version 8.5 and am not able to find any integration documents. I have them working in an Avaya CS1000 environment but would like to use them in...
Trying to get opinions for the best IP Consoles out there. :)
I am looking for the best compatible IP console(s) for a CS1000M on version 5.5 (soon to be 7.6) and would appreciate any opinios you can offer from everyone's experiences.
Also,
can anyone recommend an replacement for Amtelco...
phonedudeSr - if you are a Nortel shop, are you trying to SIP connect to someone else's Cisco CM? The Nortel NRS side is fairly simple - set up the Cisco as a SIP Endpoint and route calls to it. It will be a static IP addressed endpoint, you will need the Publisher IP address, and will most...
...the backup schedule
Element Manager
go to System ->
IP Network ->
Host and Route Tables ->
add a new route to your server with FTP running **use the FTP server address and the gateway IP it needs to use to reach that IP (usually the same GW that your Signaling Server uses) ->
after you...
has anyone been able to utilize the Mediant 1000B to reroute PRI traffic to an alternate PBX over a WAN in event of a local PBX failure?
Thanks in advance!
Andy Ramirez
NNCSS BCM 3.0
What thaaa????
does anyone have an .ini of a MP-124 that is working with SIP connectivity to a CS1000M they would be willing to share? Also, does anyone know the website URL to get the latest SIP firmware for the MP-124?
Thanks in advance
Andy Ramirez
NNCSS BCM 3.0
What thaaa????
anyone had an opportunity to install or demo the MVC 2050 client on any devices. We are trying out the client on a Motorola MC35 with Windows Mobile 5 and it seems to work OK but the client will only work thriugh the speaker of the device because ther is not a wired headset connected to it. I...
were you trying to copy an ACD set to another TN, sometimes that will corrupt your data. Have seen it before where a copied ACD set or an easy change to an ACD set would only show that the TN had programming but there was no way to recover the TN by OUTing and such. Had to have Nortel fix...
MWK audit was completed and search on CP did not find anything. All IP sets are doing this, mine included, and I am the one that would build the mailboxes. There are no SDNs built for any of the exts.
Andy Ramirez
NNCSS BCM 3.0
What thaaa????
Has anyone run across this before? We have a CS1000M (Opt 81C)on Succession 4.5 and our IP phones are continually having the MWI light come on but there are no new messages in the users mailbox. The firmware on the phones is the latest release. Any help is greatly appreciated.
Andy Ramirez...
Are you trying to input your DN's from a spreadsheet. Sounds like you are looking for a script that will build the phone or whatever you are tryiing to do and then read the DN from a spreadsheet saved as a CSV. Is that right?
Andy Ramirez
NNCSS BCM 3.0
What thaaa????
Thanks for the reply MIK61C
i was able to get it to work by piecing together this thread with another thread. What i did was create an SDN with the ACDN of my CallPilot agents as a voice messaging service then my new ACDN was NCFW to that SDN service. This works great! Kudos to you for sharing...
has anyone other than MIK61C had any luck with this. When I try to use the CH_D key it never answers. What am I missing?
Andy Ramirez
NNCSS BCM 3.0
What thaaa????
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.