Search results for query: *

MSL10BM.

SL100 is the big brown cabinets and the IPE shelf is a Meridian shelf like off of an 81c. The interface card, I am talking about is not part of either system. It is a Telstrat device that has 4 lights on the front Power, MTC, red alarm and yellow alarm along with 4 ports for RJ45 connectors to...

Thank you for your reply. I have verified dip switches each time I have switched them out. ON my host end, switch 3 is on and on my remote end, switches 2 and 3 are on with everything else off.

I have an SL100 with an IPE shelf remote. I have 2 LGC links going to the T1/IPE interface (Host) to a T1/IPE interface (remote) to the IPE shelf. Last Tuesday, the IPE shelf dropped. No power outage or weather caused this. I had no alarms on the T1/IPE interface cards which is odd because...

I never looked there. I will check that. Thank you.. It is the same as the nortelid that I gave him. I appreciate the help...

I gave him the software version which is MSL10BM. I gave him the site ID, but he keeps insisting on software licenses...

I appreciate it. I never heard about it, but I am sure since they exist on other old switches, that they also do on this one. Thank you again for your help...

I do have an SL100. It was installed in 1987 and software release is MSL10BM. It hasn't been updated in a very long time... What Serial Number are you talking about and where would I get it from??Thank you for the response...

Is anyone aware of software licensing on just a regular old PBX like an SL100? I have never heard of anything like it on a PBX, but a guy that is doing a survey for pricing to go IP here on our site is adamant that there is software licensing on this old switch and he can get cost savings...

both loaded from CC this morning. Still have the alarm....

yeah. dial tone is available and each unit has been reloaded. I appreciate your help..

none are exceeded. I fixed all of my issues in almstat the other day while trying to figure this out. I am not sure what this alarm is.

WHen I do the querypm flt, it just shows LCM unit 0 insv and LCM unit 1 insv. no fault shows up.

How do I define a break key using Netterm? When I log into my SL100, I send a break with Ctrl + pause/break... When I try that using Netterm logged into the Octel 350, I get invalid character. Any help would be greatly appreciated.

I have an Line alarm, but when I go into LNSTRBL, if gives me no information other than I have a critical alarm in LCM 3-0. I have gone back through logutil but can't find any info. Where would I find the issue here? Thank you for any help you can provide...

Is there a limit to number of intercom group members and also is there a way to mass notify an entire intercom group instead of 1 at a time. Thank you for any help you can provide....

I was wondering if the 81C can be tied in to an existing PA system and if anyone has done this before. Basically we are looking to be able to pick up the phone, dial an access code and be able to speak throughout the building on an existing PA system. Does anyone have any experience with this...

Switchwitch, I will definitely let you know what direction we go and why we did it. Thank you all for your inputs. THis was very helpful and will help all of us make a decision...

Thank you guys for all your inputs......... It was a big help... Hopefully I can fight the battle to keep NORTEL since we have an existing option 81C. Our Network guys are pushing for CISCO.............

I was wondering if any of you had any inputs on this. I am presently working on an Air Force facility that is going VOIP in the near future. We had a visit from CISCO last week. We are going to schedule a NORTEL visit in the near future, but I was wondering from some of you who have already...