Search results for query: *

Hello, I have a few servers & a couple of VIOS that I need to change the MTU on, I'm knocking it down to 1400 and I believe the syntax to do this is as follows:- smit chif or chdev -l <interface> -a mtu=1400 Is this correct? Cheers Nick

Hello, I’m having fun & games with NFS mounting between two linux boxes  Basically I have it mounted but it’s not carrying the arbor:arboradm ownership across with the NFS mount, how can I get it to do this? The arbor & arboradm uid & gid are both the same on each server and I did an NFS...

Hello, Still no luck with that either :-( pkg install system/header Creating Plan (Solver setup): | pkg install: No matching version of system/header can be installed: Reject: pkg://solaris/system/header@0.5.11,5.11-0.151.0.1:20101105T002136Z...

Hello, If my rootvg is mirrored how can I tell which is the primary mirror:- lsvg -p rootvg rootvg: PV_NAME PV STATE TOTAL PPs FREE PPs FREE DISTRIBUTION hdisk1 active 546 105 13..00..00..00..92 hdisk0 active...

Hello, I tried that and it's also failing:- pkg install gcc-45 Creating Plan (Solver setup): pkg install: No matching version of developer/gcc-45 can be installed: Reject: pkg://solaris/developer/gcc-45@4.5.2,5.11-0.175.1.0.0.24.0:20120904T171315Z Reason: All versions matching 'require'...

Hello, I have just started using Solaris 11 and am trying to install gcc but it fails with the following error:- pkg install gcc pkg install: The following pattern(s) did not match any allowable packages. Try using a different matching pattern, or refreshing publisher information...

...off service iptables status You do the above and all is fine for an hour or three and then it's up and running again. So last night I used system-config-firewall to disable it and so far so good! I have checked all our RHEL & OL 6* servers and they are all doing the same, a bit strange me...

Hello, I keep on stopping the FW on my RHEL6.3 server with the service iptables stop command and then chkconfig iptables off. This stops the FW for a while but a few hours later it's back running. How can I stop it so that it does not keep on restarting? Cheers Nick

Hello, yeah, they were mount points and I have got them all up and running now :-) cheers nick

Hello, Yes, just the one fiber card as they did not want to spend the money for two at the time of purchase :-( I have now had the card replaced, re-zoned the server and re-registered it on the CX300. Once that was done I was able to get all the powermt devices recovered and the only issue I...

Hello, One of my IBM P55a servers decided to allow the fiber card to fail and now I cannot see any of my SAN LUNS from the CX300. IBM are due out in 30 mins or so to replace the fiber card, can someone let me know the steps for bringing the LUNS back online please? I believe it's just a case...

...there:- fdisk -l /dev/sdb Disk /dev/sdb: 1999.3 GB, 1999307276288 bytes 255 heads, 63 sectors/track, 243068 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier...

...-c lonibm5 -g Default -p -n -l full -R -v ' for client lonibm5 exited with return code 9. 08/30/13 08:03:01 savegrp: lonibm5:probe succeeded. * lonibm5:All rcmd lonibm5, user root: `savefs -s lonadm2 -c lonibm5 -g Default -p -n -l full -R -v' * lonibm5:All rshd: 0826-823 Cannot look up the...

...-c loncons4 -g Default -p -n -l full -R -v ' for client loncons4 exited with return code 9. 08/28/13 08:05:43 savegrp: loncons4:probe succeeded. * loncons4:All rcmd loncons4, user root: `savefs -s lonadm2 -c loncons4 -g Default -p -n -l full -R -v' * loncons4:All permission denied *...

hello, I need to mirror the boot disk on my newly build hp-ux 11.11 server, can someone let me know the steps for doing this please? Do I still need to install Mirror-UX to achieve this task? Cheers Nick

Hello, I'm awaiting more details from the user who reported this issue, I have checked and I do not appear to have SRM installed on this system currently! From what I understand it was some in-house software that was working fine and all of a sudden all the process just went without a trace...

Hello, We have a server that was running fine and the other day all of a sudden a whole lot of random processes just disappeared. When running an errpt -a nothing came back and I was wondering if anything else could be checked to see what went on? Cheers Nick

Hello, Our eval license on the XL compiler has expired and we have been sent an extension one by IBM, how do we get the compiler to accept the license? In the good ole days I remember using something called LUM but this does not seem to exist anymore! Below is the error message we are...

Hello, In the end I just went through all the pre-reqs and eventually got it installed. Just when you think you are there another 10 pop up that need to be installed :-) cheers Nick

hello, I have a requirement to install kdevelop on one of our AIX5.3 servers but I am having issues with regard to the many 100's of dependancies it requires. Any suggestions on how I can get round this issue? I have tried to install it from the AIX toolbox cd and have the same issue, this is...