Search results for query: *

spoke to soon! was just browsing web then it said "cannot find page" on any site i tryed to browse.(tryed lots so wasnt a server down at the other end) However outlook express could get a connection???!!!? did /release /renew and all worked fine again, the IP lease wasnt due to expire for...

thanks bcastner, have assigned static ips for a while then gone back to dhcp, and done what you mentioned above and all seems ok for now! You mentioned allowing a range of 50 entries, i did have a range of 6 entries as the the DHCP server kept issueing ip's incrementally and constantly...

hi glenjohnson, thanks for reply it is a wired network, if i did clone the mac address of desktop, wouldnt i have to have that machine on for any others to access the net? how would i go about changing the mac address of my router?

hi, bcastner yes i can adjust the lease interval on the DHCP it is set to 1day 0hours 0min would you recommend a different setting to resolve this problem?

Hi, Hope somebody can help as im stuck on this! My setup is i have a Bt voyager router, and 4 client PC's connected to this via a network switch. The router is set to DHCP and all clients issued ip's from this The problem has arisen for no apparant reason other than adding the 4th client 2...

Hi, Hope somebody can help as im stuck on this! My setup is i have a Bt voyager router, and 4 client PC's connected to this via a network switch. The router is set to DHCP and all clients issued ip's from this The problem has arisen for no apparant reason other than adding the 4th client 2...

using Dreamweaver 4, does this have that feature and is how do i find it?

thanks have done it as a single page. does anyone know how i can test my webpage load time for free? i have dsl and dont know if it will be slow for 56k users.

Hi Im trying to construct a webpage with 2 frames top and mainframe. In the topframe is a navbar with drop down menus, however when they drop down they are not visible below the bottom of the frame they are contained in? Is there a way round this, i want the drop down to go over the content in...

ok i have done that will see how it goes! out of interest why was it issueing to higher IP when lower ones werent in use? ie there were only 2 of the 4 computers on the network switched on?

Hi, My Bt voyager 200 router acts as DHCP server to 4 clients all obtain IP automatically from this. Problem is have rebuilt a comp and when re connected to network it was assigned 192.168.1.8 however there are only 4 clients and the router is 192.168.1.1 have released and renewed ip on all...

Hi, Im having problems in corel draw 12 with objects staying on screen when you move them or copy etc, sometimes if i move things half of the object dissapears? the screen doesnt seem to be refreshing, if i minimize then maximise the window all is well. Is this a memory issue? Can you adjust...

strange thing is version 7 works fine!!?? is there any files icould perhaps copy from V.7 install to the V.8 folders that would enable the printer dialog box to display correctly?

thanks javabear is there any other way round it as the printer settings return to default even if i set them in start/settings/printers. is there any way i can make xp run coreldraw in 16-bit?

...in Windows XP and have problem when trying to print. When i click the properties button it displays the screen but it is displayed wrong (*&|||||||) like that where it should display, page size etc. If i access the printer properties through other progs like word all displays fine. Have...

hi have just installed new network with switch and my router is set a DHCP server. Having only worked with static IP's before, how do configure Zonealarm to allow computers on my network to access each other? as i dont know there IP addresses change due to DHCP?? Any advice greatly appreciated.

ronspree, i now have an 8 port swithc hooked upto the voyager 200 router/modem, i have left the wireless side of things for now. But im having problems hav run xp networking wizard on all machines, and selected "this computet connects directly to the internet or through a network hub" on all...

mclarko, you can see what the firewall settings are for the V200 if you go into firewall and click 'View default firewall policies for each level' it gives a simple 'in or out' allowed or blocked. There is a custom option, and my question is can anyone tell me what the different options should...

Many thanks for your help Jump1ng! Used that driver and all worked first time think i was using the VIA driver instead of the Intel one......anyway all sorted now!! Thanks to bourbaki to for your advice.

hi i havent bought a router yet, after looking at all the options think ill opt for a switch and access point. With all wired clients connected to the switch and the AP and router, connected to the switch will i be able to use MS File Sharing between wired and wireless clients?? Unless anyone...