Search results for query: *

Hi Hoping this is a quick one. I have an ISDN30e presented to a ground floor location in my office. I plan to install a new PBX in a 2nd Floor Comms Room and need to connect this to the ISDN30e. The final plan is to move the ISDN30e with BT but timescales add a risk to my project. I thought...

Hi Hopefully a simple one. When I connect to a 2950 switch using the nice web interface. I do not get any stats for port utilisation for bandwidth in the Dashboard view. Do I need to turn something on? Thanks

Thanks for your help.

I have created a new VLAN on a Catalyst 3500XL and assigned port 24 access to it. The VLAN has an IP and Subnet Mask but for some reason it is always ahutdown. I have tried the no shutdown command but nothing happens?? This is all new to me and I'm learning as I go. Any help would be great. Thanks

Can anyone point me in the right direction on this one. I am looking to buy my servers for an ISA2004 implememtation project and wanted some help on specs. The main areas I'm interested in are Disk space and memory. Do Microsoft have recommendations on disk configuration i.e. OS and DB...

Does anybody have any recommendations on memory levels for 2950 24 ports switches? We currently have around 50 users spread across 3 switchs and each currently has 3MB or memory. Is this too low? Also, when looking into CPU usage and memory usage stats what is considered high? over 50%? 80%...

Hello I have two 2600's setup back to back for some bandwidth testing. Can someone help me out on how to change the bandwidth between the 2 routers to simulate different WAN link speeds ( eg, 1.54MB, 1.024MB, 1.98MB etc ) Thanks

Hi Hopefully an easy one for you. Can anybody point me in the right direction for resetting a 2600 router back to factory default? Thanks

No but I thought this wouldn't matter as I am only pinging routes that exist. Or do I have that wrong? If so, from my configs what interfaces should the 0.0.0.0 routes use? Thanks for all your by the way ( both of you )

Isn't the 10.0.0.0/16 being pickup from somewhere? The thing that made me think something was going wrong was the way that the 10.127.0.0 static entry on SOUTH does not have the /16 subnet at the end as with the 172.16.0.0/16 on North. Thats why I thought it was assoicating it with the...

OK ROUTER 1 SOUTH#show ip protocol SOUTH#show ip route Gateway of last resort is not set C 144.44.0.0/16 is directly connected, Serial0/0 10.0.0.0/16 is subnetted, 1 subnets S 10.127.0.0 [1/0] via 144.44.0.1 SOUTH# ROUTER 2 NORTH#show ip protocol NORTH#show ip route Gateway...

Hi Both are ip classless already i'm afraid. and I don't think i'm running RIP?

Oh yeah sorry IP

Hello I am setting up a test network that sits on a live LAN/WAN environment. I have a 2600 plugged into a switch on my live network subnet of 10.127.x.x. The ethernet port has been given a vaild IP for this network. Then using a DTE/DCE cable I have another 2600 hooked up on the serial ports...

Hi I'm trying to get some stats out of my ISA box. I would like to see a report that tells me how much traffic has been delivered to cliets by cache and how much was delivered direct from the web. Can this be obtained from ISA on Windows 2000 server? Thanks

I have a small problem with my new RRAS solution. Everything is setup and works fine but the problem is down to Proxy information. My remote clients can dial-in and pick up e-mail and file access but cannot access the web. The reason being that their dail-up connection is not configured with a...

Hi I am trying to get into a Meridian Voicemail system but I'm having some problems. I do not have a clue what I am doing and I'm following a set off instructions. After logging into the Meridain system and get the OVL000 prompt, I type AX as told but get a ERR609 appear. Any ideas what this...

Hi Does anyone know how to configure ISA, on Windows 2000, to listen for web requests on multiple ports? i.e. 80 & 8080 Thanks

Hi bods This is all very new to me so I need a little help. I have been asked to disble caching on our ISA servers for a particular site. Can anyone help me do this? Or point to the right place ( not too sure if I'm doing this right ) Thanks

Thanks I will get it on to one of our 2003 servers and see what happens Thanks again