Search results for query: *

...vpngroup type ipsec-ra tunnel-group vpngroup general-attributes address-pool vpnpool tunnel-group vpngroup ipsec-attributes pre-shared-key * telnet timeout 5 ssh 10.0.0.0 255.255.255.0 inside ssh 10.0.0.1 255.255.255.255 outside ssh timeout 5 console timeout 0 dhcpd dns xxx.xx.xx.xx...

Hi guys, I was wondering if any of you could provide a basic ASA to IPAD CLI configuration. I tried some of the configurations online but can't seem to connect the IPAD to the VPN. Thanks in advance.

It depends on how much you're spending. Since you're using IP phones, you can always get an ASA 5505 10 user which goes for about $400, they have POE ports built in for the phone. If you want cheaper, you can buy a PIX which are old and not really supported anymore but could help, you would...

Anyone?

...15JUL10 11:38:51 1 12 012-1-50-00 29 353 0 1 12 98 SIGNALLING ERROR IN THE LIM SWITCH DATE TIME ALP NOIF EQU INF1 INF2 15JUL10 11:44:44 8 1 006-0-**-** 1 4 85 BUFFER TRANSFER HAS FAILED DATE TIME ALP NOIF EQU BRDID INF1 INF2 INF3 INF4 15JUL10 11:46:20 14 5 012-1-50-00 29 353 0 8 12 85...

Are you sure your serial port is working? You can take a key and short out pins 2 and 3 and start typing, if you get a response, it works. Try that first.

I'm sorry to bother you guys so much. Just wondering if there is anything else I'm missing. Please help, thanks.

I checked the nat (inside) 0 access-list inside_nat0_outbound and it's correct. For some reason it didn't past the whole command. Is there anything else I'm missing? These VPN set ups are such a headache, only one side can see the other. I can't seem to see what is wrong, the remote can see...

Supergrrover, I was wondering if there was another ACL I need to create. Please let me know, thanks.

Is there anything else I have to do? I can only see the main site from the remote but the main can't see the remote. Is there anthing else I need to add?

Yes, they are. The tunnel is up. Only problem is that the main site can't see the remote site. The remote site can see everything on the main site fine.

Sorry I forgot, here is the config for the main site: RiversEdgeASA> enable Username: admin Password: ******* RiversEdgeASA# show running-config : Saved : ASA Version 8.2(1) ...

...tunnel-group xxx.xxx.xxx.xxx ipsec-attributes pre-shared-key * ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns...

I tried what you suggested and it still hasn't worked. Is there something I'm missing? Should I set the peer to 151.199.191.81?

...VPNCLIENT general-attributes address-pool VPNPOOL default-group-policy VPNCLIENT tunnel-group VPNCLIENT ipsec-attributes pre-shared-key * tunnel-group 151.199.191.123 type ipsec-l2l tunnel-group 151.199.191.123 ipsec-attributes pre-shared-key * ! class-map inspection_default match...

What parts? I can get you the numbers.

Keep me posted, if it works, please click on the thank you so I could get feedback :)

Oh. I think I know where you're getting at now. Straight cable is what you need, not a crossover to connect the PIX and D-Link. Make sure you reset the D-Link wireless first. What you also need is another straight cable connect a PC to the wireless router, then you enter the static IP...

Its still taking me time to get my PIX set up. I currently have it connected a 3548 series switch. The PIX will be replaced by a 2600 series router once I get my WIC cards. I am also going to use my 7200 router once I get the proper cards. Hmm... I never learned how to forward it onto a...

This isn't a Cisco hyperlink, it's a basic configuration guide. Try this link: http://www.linuxhomenetworking.com/cisco-hn/dsl-pix.htm