Search results for query: *

I removed host part and it worked Thanks

Of coerce I am trying external IP. 192.168.x.x is internal IP address of www-server And its nated. Like so “Ip nat inside source static tcp 192.168.x.x 80 interface fa0/0 80” I sad when I remove access-group from the interface it works fine, that when I apply it Its stops working Thanks

I tryed that by removing established Still dos not work Thanks

Cannot open website from outside. access-list 122 permit tcp any eq domain any access-list 122 permit udp any eq domain any access-list 122 permit icmp any any access-list 122 permit tcp any host 192.168.x.x eq www established access-list 122 permit tcp any any established access-list 122...

No luck. FTP steel not working. access-list 122 permit tcp any eq 53 any access-list 122 permit udp any eq 53 any access-list 122 permit icmp any any access-list 122 permit tcp any any established access-list 122 permit udp any any range 10000 20000 access-list 122 permit udp any any eq 5060...

Hi Guys Ok Now could browse web, but now FTP don't work. I added other line to ACL in acess-list 122 permit tcp any any eq 21 that did not help. Please Help Thanks

Extended IP access list 122 10 permit tcp any eq domain any 20 permit udp any eq domain any (921 matches) 30 permit icmp any any (8 matches) 40 permit tcp any any eq www established 50 permit udp any any range 10000 20000 60 permit udp any any eq 5060 (621 matches) 70...

Did ii and still the same access-list 122 permit tcp any eq 53 any access-list 122 permit udp any eq 53 any access-list 122 permit icmp any any access-list 122 permit tcp any any eq www establish access-list 122 permit udp any any range 10000 20000 access-list 122 permit udp any any eq 5060...

I applied following ACL to the external interface inbound and still cannot browse Internet Everything else seams to work. If I remove ACL internet works. access-list 122 permit tcp any eq domain any access-list 122 permit udp any eq domain any access-list 122 permit tcp any any eq www...

Hi Guys I have Cisco 2800 series router with 3 fast Ethernet interfaces. Two ISP’s If anyone has any idea, I would like to archive Internet redundancy. Thanks

I am trying to create QOS policy for VOIP on layer 2 switch. I am terminating over FXO, so I am having issues only on internal LAN The switch is Cisco 3548 and IOS c3500xl-c3h2s-mz.120-5.WC15.bin Thanks for Help

Could a layer 3 switch replace a router and what the best use for l3 switch? Thanks

I am new to Cisco. What the script to prioritizing RTP traffic would look like Thanks

Its very simple setup ISP-->831-->LAN LAN is behide NAT Thanks Again

Hi Guys I get Time Worner Cable 9 M down 386k Up with 5 Voip extensions Cisco 831 router all internal devices behind NAT I need help to write proper QOS strategy Thanks a Lot

I need to build high availability internet with 2 ISP’s for VoIP servesices. If anybody could point me in the right direction. I am aver of BGP but ISP’s not to agreeable Thanks

Hi MikeHalloran You know what is coming next. How do install yumex and then what's the centex to install ShoreWall. Remember! I am complete Nub. Thanks Again

I am complete Nub to Linux. Please somebody give me detailed instructions how to install ShoreWall On Linux CentOS 5 Thanks

Hi Guys Here it is Now I see something is wrong [trixbox1.localdomain iftop-0.17]# ./configure checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking target system type... i686-pc-linux-gnu checking for a BSD-compatible install...

...Thanks for attention Here what I get after command make And ofcorse I run ./configure before "make" [trixbox1.localdomain iftop-0.17]# make make: *** No targets specified and no makefile found. Stop. [trixbox1.localdomain iftop-0.17]# ls aclocal.m4 configure iftop.cat...