Search results for query: *

Nope using a handset or Headset.

This one is odd and i've only seen it happen to two people. Wondering if any of you have witness this and have a fix for it. Sometimes (It sporadic) users are listening to Mermail and it will skip a few seconds of the message, even though the user hasn't pressed any options. Any ideas?

Yes, I did it in two locations with Hicom 300's. No issue at all.

Databit is correct. You can't use dial steps, they just don't work. Record your DTMF tones as an annoucement and it will work.

try: Login:tech PW:field If Siemens hasn't reset it you will be brought into the technicians admin console. Be sure your have your disk before you begin this process as all will be lost. Might want to get out a pen and write down your settings or print them out.

Its a little dated these days but most of the AMO commands are available via this site: http://www.ee.und.ac.za/DataCDs/Hicom300Data/H300shb/Shbv34/shbv34.htm I have the actual tech manuals on CD-Rom but they are to large to email. Try out this site and see if you can get by, have specific...

Network Interqueue or IP Interqueue. Doesn't matter, take back and transfer will work in either senario.

woops, sorry misunderstood your original question.

DID ranges, circuit ID of the provider your porting from and carrier name. If these numbers are pots lines than skip the circuit ID, just provide the number and carrier. All of this should be handled by your the carrier you are moving to but some do better than others so make sure you do...

Sorry Unkalary, I need a little enlightenment. what load are these ISM parameters in? Thanks

So any suggestions or FAQ's on where to start to roll this thing out? Any other input, or should I just call my vendor?

I do have OTM and it is it working order but none of the IP stuff is currently configured.

Looking for a little info. I just found that had an ITG card in storage and a few i2004 phones. I'm curious to know how easy it would be to set these up without actually having a vendor come out. Also could I be missing anything from the mix? The card is ITG-P, NTVQ55AA, Rlse 9 (I have not put...

No manuals, if you go to school you will get a course booklet but thats not ever really a manual. You can probably get more detail using the help files in architect. It has answers to most basic senarios.

ahh another person who knows my pain!

My CDR has not worked since I came here two months ago. I have inherited a seriosly neglected switch so I've been going through and cleaning up things as I can. CDR is on that list but it hasn't been a high priority. We use OTM for CDR data, for some reason I'm unable to get it restarted. I...

add IOD370 to that

EOM

perfection! Thanks you

How can I found out what TN this paging system uses? THanks in advance. REQ: PRT TYPE: RDB CUST 0 ROUT 14 TYPE RDB CUST 00 ROUT 14 DES PAGE TKTP PAG NACC PGNR ESN NO ICOG OGT SRCH LIN STEP ACOD 89 TARG CLEN 1 OABS TIMR ICF 512 OGF 512 EOD 13952 DSI 34944 NRD 10112...