Search results for query: *

Hi Edok, could u pls semd me u r config file so that i can also go though it and try to help u. Hitender (BE.CCNA) Best Of luck Try & Try Till U succedd and update others on u r achievments hit_singh@rediffmail.com

Facing same problem with my 450 with new firmware.not able tolgin as password is not known. NetICs is not working. What can be done now. Hitender (BE.CCNA) Best Of luck Try & Try Till U succedd and update others on u r achievments hit_singh@rediffmail.com

Hi Chuck, Try this simple command. let say u want to back up the CONFIG.CFG filw which is in Flash to u r machine which is TFTP server.Let say tftp server IP IS a.b.c.d copy /flash/CONFIG.CFG A.B.C.D CONFIG.CFG tHIS WILL COPY U R BACK UPFILE TO THE FOLDER WHICH U HAVE ASSIGNED TO WHILE...

Hi Boom, Have u make the IP FORWARDING ENABLE ON THE routing ports and enable globaaly Rip.In this u have to use RIPV2 Hitender (BE.CCNA) Best Of luck Try & Try Till U succedd and update others on u r achievments hit_singh@rediffmail.com

hi There is some EME interference inpath of u r server cable.Do check for that. If u have device Called PENTASCANNER then test with that. Hitender (BE.CCNA) Best Of luck Try & Try Till U succedd and update others on u r achievments hit_singh@rediffmail.com

Bag!!!!!! If u can wait for a day i can send u the soft copy of 7480 tomm. Hitender (BE.CCNA) Best Of luck Try & Try Till U succedd and update others on u r achievments hit_singh@rediffmail.com

Tigger, First of all check the cable connectivity to AS server.Some times in these type of problem we change NIC SWITCH but don't take care of cable laid to whihc server is connected. Get the cable checked.Because u have checked at Layer 2 so chacke with layer 1(physical layer.)i.e cable...

STP should always be enable at any cost.Since its BPDUS are not much BW consumptions. I n very small network itt is goodto keepit off Hitender (BE.CCNA) Best Of luck Try & Try Till U succedd and update others on u r achievments hit_singh@rediffmail.com

Ywan Thank you very much Hitender Best Of luck Try & Try Till U succedd and update others on u r achievments hit_singh@rediffmail.com

jaco pls got hrough manualand look thta can u assign global filter id less than 300. Hitender Best Of luck Try & Try Till U succedd and update others on u r achievments hit_singh@rediffmail.com

jaco Most probably when u create filter set globally u have to assigned filter id more that 300.just go through the manual. I can't imp[lement this thing because we are vendore and i can'timplement on Customer site Hitender Best Of luck Try & Try Till U succedd and update others on u r...

Yawn, Could you pls tell me what is RIS operations. Hitender Best Of luck Try & Try Till U succedd and update others on u r achievments hit_singh@rediffmail.com

Jaco, If a machine woth these ip's are static then why don't u implement Mac address secuirity. Although,u r configuration seems to be ok. Hitender Best Of luck Try & Try Till U succedd and update others on u r achievments hit_singh@rediffmail.com

Jaco, Pls let me know that whatever vlan's u have creatdeare subnet based or port based. Hitender Best Of luck Try & Try Till U succedd and update others on u r achievments

hi If u have IP based vlan's then u can make u r ports the potiential member i.e what ever pkt it recieves by seeing its header it will route the paket to that vlan Hitender Best Of luck Try & Try Till U succedd and update others on u r achievments

Dear Handy, Ifu r usinglayer thre switchesorany router youwillahve toapply accesslist(in cisco) and filters(in Nortel) for specifiedor range of Man addresses Hitender Try & Try Till U succedd and update others on u r achievments

HI Jaco, pls go through follwing steps just go through following eg. V1-DEFAULT VLAN VLAN 2-=192.168.134.x/24 V3--192.168.136.x/24 v4-192.168.138.x/24 imply filters so that v2 and v3 are not able totalktoeach other. step 1 config ip traffic-filter create destination dst-ip 192.168.134.x/24...

Dear Jaco, I have applied filters on pp8600 with version 3.2 and it worked. about the way to configure i have told u above. from nortel or u r vendor can get u new version of image. Hitender Try & Try Till U succedd and update others on u r achievments

Dera bc bear, it seems that u switch is fine only problems lies that u pc keys are not working on hyper.Thre is one option to set the keys somehat like v.22 --.I DON'T have console right now otherwise i would have told you.Check with these settings. BOL

Dear Slim/camp first i want to contradict the statment given by CAMP, to try with cross cable.It will not work as slim has mentioned that he has not given any inband ip for telnetting.U can only use cross cable when u have assigned any ip to it. now slim, first check the console cable with...