Search results for query: *

Hi, Currently we use a software by Amcom for our Doc's answering service. We are getting rid of the service and are looking for a low cost alternative to amcom. something that will keep a data base of Doc's or other numbers and info that an operator can retrieve from a PC to know how to take...

why not just use a phantom TN? Build a 500 set and then setup VM on it.

Use a Tie line and then setup steering codes jut like MG2005 is saying...

I am a Opt. 81 guy and recently inherited a CICS with a call pilot 100. I have a user that wants to give callers to his VM the option to hit a number and transfer to his cell. The only thing I have found is to forward to an ext. not a number. When I try to enter more that 4 numbers, It tells me...

Thanks PBX geek but I have already taken the 200c and the 300c. I am now looking to build on this foundation. OTM is not used at our hospital yet. I have it budgeted for next year, January to be exact. part of the purchase is training on it so OTM is done also.I 'm jsut looking for the most...

Hi, Great Forum here I have certainly learned alot. My question if I may ask is: I have inherited the PBX room here at the hospital and My back ground in in Network infrastructure and PC hardware. I have been to Dalllas for the Merdian 1 fam class and the basic admin class. The moeny is ther for...

find a key on the set with nothing on it.do an easy change and add a key with a MWK.

default is id: admin pw: admin

Thanks for all the help on this one! It is working for now. they are using plantroics boom sets with these units.the setup is a small box that plugs in to the console then a earpiece with a boom mic is attached to the box. no other handset it used.

Thanks , checked again this morning ..system is fine! I believe it was told to me if you have more than 1 console they really dont go to nite they busy themselves? is this the case?

Tn was in MBSY.

hi all, I have a 2250 here that will not come out of busy. checked everything, replaced the console, the DB25-anphenol connector,nothing has help thus far. I checked the TN's both of them they are both showing Idle. any ideas? when trying a different console I sitll could not get out of busy.

Ahh good one PerryPJ, I completely overlooked that one! I am learning alot here. This is almost better than the admin classes at global in texas!

Yes Nortellian but, He stated in his first post what his FDN and Hunt is (1848) but his print of the TN shows the hunt going somewhere else! We were only saying that if he wants hunt to go ot 1848 he needs to change it because his TN shows hunt going 4072 not 1848! Sorry thats all I was trying...

Sorry, A bit of a newbie here but you appear to be hunting to 4072 not 1848. Will this make a difference?

Thanks TouchtoneTommy, I got hung up for a sec at the prompt after the copy from ext because it said data? I entered in the new ext and it worked fine. Although I had no idea what I was doin, Your help was wonderful and worked perfectly! Thank you very much!

I have inherited a AT&T partner system. It has 2 partner 400 cards and 2 partner II 206 cards. Sorry I may have them backwards. Anyhow I had an original problem of an extension with bad static. I found out from Avaya that I could move the set to the next port but programing will not move with...

Ok this may be a long one but here it goes, I have a user with 2616 on key 0 he has a internal dn of 5251 and on key 1 is CFW 4 4804 and key 2 is 4804( which is a DID). his setup is as follows 5251 is his busines DN without VM(dont ask why) and 4804 is his "private" DID line and it...

Thank you very much...I will look into this in the morning. Avaya was the only place I have not looked yet. I will report back my findings!!! Thanks again!!!

Thanks for reply guys however, I am a complete infant to this system. I do not know how to "move" "copy" I have no clue what VMS coverage is or what a 206 module is? I was hoping for a walk through or if not a place wher I can find a manual to read about this system?